Ethernet-based output module with 2 x analog output, 4 x digital out with PWM, 2 x relay contact, MODBUS

Multi-Network Output Module with Galvanic I / O
10/100 Mbit Ethernet Connection
Password Protected WEB Server
2 Analog Outputs with Voltage and Power Generator
0 - 20mA, 4 - 20mA, 0 - 24mA
0 - 5V or 0 - 10V voltage output
4 digital (open drain) outputs with ON / OFF or PWM
2 relays with COM, NO and NC contacts
4 scheduled actions, 1 time or weekly
NTP, SNMP v2, SNMP trap for up to 5 recipients
MODBUS TCP / IP
HTTP upload with current status in XML or JSON remote server file
HTTP API commands in server and client mode
HTTP Post can be sent to 3 servers
DIN rail / wall mounting
Supply voltage: 10 - 32VDC / max 250mA

TCW280
3,104.00 DKK
Tax excluded
Quantity
Physically in stock  

  • Download PDF
  • file_download Downloads
  • live_help Ask a question

TCW280 er et analogt/digitalt udgangsmodul med Ethernet-grænseflade og galvanisk isolation mellem strømforsyning og udgange.
Den har 2 analoge udgangskanaler. Hver kanal kan sættes til enten spænding (0-5 eller 0-10V) eller strøm-loop (0-20mA, 4-20mA eller 0-24mA) tilstand.
De genererede signaler har supergod stabilitet og med 12-bit opløsning.
Enheden har også 4 digitale udgange, open Drain. De digitale udgange er enten ON/OFF eller som PWM (puls-vidde-modulation).
I ON/OFF-tilstand kan de bruges som standard digital "kontakt" til styring af enheder med "dry-contact". 
I PWM-tilstanden kan udgangen bruges som en samplet "analog" udgang for passende processer - DC-motorstyring, LED-dæmpning osv. 
Frekvensen i PWM-tilstand kan være op til 2 kHz.
TCW280 har 2 skifte-relæer. Begge relæer kan aktiveres fra WEB-grænsefladen, M2M-protokollen eller af tidsplanen.
Planlægningsfunktionaliteten tilbyder 4 forskellige tidsplaner for enkelte eller gentagne (ugentlige) opgaver.
Modulet understøtter MODBUS TCP/IP, SNMP og HTTP API til M2M kommunikation.

4 other products in the same category:

Combined CO2 and barometric...

Combined CO2 and barometric pressure sensor with a MODBUS RTU RS485 interface.

Multi sensor for CO2 and Barometric pressure
Interface: RS485 - MODBUS RTU
LED indicator for status of communication
Long-term stability based on digital signal processing
Self-calibration on fresh air for CO2 measurements
Changeable communication parameters
Non-volatile memory for all settings
Firmware update via the interface
Size: 81 x 81 x 30 mm
Weight: 66g
Supply voltage: 4,5 - 26VDC / Max. 150mA

Price 1,894.00 DKK
Product code: TSM400-4-CP
Physically in stock  
Quick view
GSM alarm and remote...

GSM alarm and remote control, data logger, I/O with digital and analog, relay, Modbus, 12 - 24VDC. Only for 2G.

GSM-alarm - ONLT FOR 2G 
Setup via USB with Windows setup program, SMS and HTTP API
2 digital "dry contact" inputs
2 analog inputs, 0 - 10VDC - with resistance can be changed to input
2 mA analog inputs, 0 -10VDC or 0-20mA, 10bit (WEB control)
4 relay outputs, NO and NC
1-wire input for up to 8 Teracom sensors
RS485 interface for max. 8 MODBUS RTU sensors
data logger with memory for 70,000 logs
Upload data to HTTP Server
SMS alert to max. 5 recipients
Email alert for max. 5 receivers (SMTP with TLS support)
relay outputs with calls
12 to 24VDC, 350mA @ 12VDC - acquisitions PSU

Price 1,200.00 DKK
Product code: TCG140
Physically in stock  
Quick view
The temperature and...

The temperature and humidity sensor with RS485, -40 to + 85 ° C, 0-100% relative humidity, MODBUS, daisy-chain

Combination sensor for temperature and humidity measurement
Modbus RTU
2 x RJ45 connector - with daisy chain to the next module
RS485 Bus to Controller.
Up to 32 devices can be connected Controller
3.0% relative humidity measurement accuracy
12 bit resolution for humidity measurement
14 bit resolution for temperature measurement
With the mounting flanges
Excellent long term stability
Each module has its own ID code

Price 876.00 DKK
Product code: TSH300
Physically in stock  
Quick view