Via RJ45 UTP/STP kabel

HDMI BOOSTER HD 1080p
HDMI signal over single CAT 5e/6 cable
Resolution 1920 x 1080 @60Hz
POC: Power Over Cable. Transmitter powers Receiver
HDMI 1.3/HDCP 1.2
Supply voltage: 5VDC

4K HDMI Extender over Patch Cable (Cat 5e / 6)
HDMI 1.4 / HDCP 1.4
With HDMI Loop out
Audio Input and Output
Up to 120 meters (Point-to-Point)
4K @ 30Hz
Plug and Play
Power supply: 5V 1A (2 pcs. Included)
Dimensions: 60 x 56 x 19 mm

HDMI Video Receiver with PoE
Transmitter Module is purchased: HDMI-Multi-HD-T
Video Wall with a maximum of 64 units
H.264 Video Encoder / Decoder, IR transfer
Delay of approximately 1 second from transmitter to receiver
HDMI 1.4a
Connection over IP - Use switch with IGMP Snooping
Max. 64 Groups
Range Up to 100m - Point to Switch or to Transmitter
Cables Cat 6a. Good quality
Edid Emulation - possibly not on all screens, then buy it from Danbit
1 x RJ45, 1 x DB-9, 1 x HDMI exits
Supply IEEE 802.3AF / to POE + or 5V DC, 2a (not included)
Requires quality switch When used over IP
Dim: 130 x 82 x 30 mm

4K HDMI Extender Over IP
HDMI 1.4 / HDCP 1.4
Up to 120 meters (point-to-points)
4K @ 30 Hz
2 x USB-A 2.0 (HID emulation)
One-to-One or One-To-Many
Max 32 RX Can be connected One TX (Via Ethernet Switch)
Remote-IR from TX to RX
Plug and Play
Power Supply: 5V 1A (2 included)
Dimensions: 107 x 105 x 27 mm
Operating temperature: -15 - + 55 ° C
Weight: TX 499G, RX 494G
acquisition: K-USB4AM-AM -Fe to connect the USB-A port to PC

HDMI sends and receives over RJ45 Cat. 6/6e
1080P@60Hz
HDMI 1.3, HDCP 1.2
EDID
Suitable for transferring HDMI over an existing RJ45 installation
Up to 50 meters (Depends on cable quality)
Use only quality cable
HDMI male, RJ45 female
POWER over cable, the supply to the reciver module is transferred via cable.
Can be supplied with 5vDc via Micro USB Power on each module

HDMI Matrix over IP.
Video Wall configuration
Setup with DIP switches (TX-RX Pair)
Max 24 transmitters and 96 receivers (contact us for buying TX or RX units separately.) < br> HDMI 1.3, HDCP 1.3.
HDMI loop out to the local monitor
Resolution 1080p @ 60/50/30/25 / 24Hz, 720p @ 60 / 50Hz.
point to point over Cat 6. Maximum . 100meter. Point to many Hotels can be supplied via PoE (802.3af) or 12VDC 1A (PSU included).
Power Consumption: 2.5W.
Switch must support protocol: IGMP Snooping or IFMP.
Delay: 120ms
Operating temperature: 0 ~ 40 ° C.

HDMI video transmitter PoE
Suitable for video wall
With HDMI Loop Out
Delay of approx. 1 second from transmitter to receiver
HDMI 1.4a - H.264
By IP multicast use switch with IGMP Snooping
Range up to 100m
Cables Kat. 5th / 6
EDID Emulation
IR Transfer
1 x RJ45, 1 x DB-9, 1 x HDMI Input, 1 x HDMI Output
Supply IEEE 802.3af / at PoE +; 5V DC, 2A (not supplied)
As receiver, use HDMI-MULTI-HD-M

4K HDMI/USB video receiver PoE over LAN
Suitable for Video wall
Use Multi casting switch (IGMP Snooping)
1080p or 4K (3840 x 2160) HDMI resolution
HDMI 1.4a - approx. 0.1 second delay between transmitter and receiver
1 x RJ45, 1 x DB-9 female, 1 x HDMI female
4 x USB 2.0 type A (mouse/keyboard/USB touch)
Can be fitted up to 8 x 16 video wall
Transmitter/receiver selector - 16 channels (DIP)
Supply: IEEE 802.3af/at PoE+; 12V DC 3A (not included)
Range up to 100m over direct Cat. 5e/6 UTP cables
EDID emulation and IR transfer
As transmitter, use HDMI-MULTI4K-T

4K HDMI / USB video transmitter PoE over LAN
Suitable for Video wall
Use Multi casting switch (IGMP Snooping)
1080p power. 4K (3840 x 2160) HDMI Resolution
HDMI 1.4a - approx 0.5 sec Transmitter and Receiver Slow
1 x RJ45, 1 x DB-9 female, 1 x HDMI female, 1 x VGA DB-15 female
1 x USB 2.0 Type B (PC / Server)
Can be packed up to 8 x 16 video wall
Send and Receive Choices - 16 Channels (DIP)
Supply: IEEE 802.3af / at PoE +; 12V DC 2A (not supplied)
Range up to 100m over direct Cat. 5e / 6 UTP cables
EDID emulation and & nbsp; IR transfer
As receiver, use HDMI-MULTI4K-R

4K 60HZ up to 60m (HDMI 2.0)
4K 30HZ up to 120m (HDMI 1.4)
HDMI2.0/HDCP2.2
Point-to-Point
CAT6 cable recommended (at least CAT5e required)
IR transmition
5VDC Transmiter and Receiver

HDBaseT Repeater med HDBase ind / ud
Maks. afstand 100 meter
Egnet til Mid-range Repeater.
Input og output for HDMI
Kan fjernbetjenes med RS232
Med EDID
Forsyningsspænding: 12VDC
Mål: 190 x 125 x 34 mm

Send incompressed 4K / HD video and audio over CAT6A / 7 cable up to 100 meters
HDbaseT communication protocol (5 in 1)
HDbaseT Supporter: Audio Video, Operation, Ethernet, USB, Power
Can be powered from HDbaset with PSE
PSE is equipment that sends Poe out on the RJ45 port
power from Mini-USB by no PSE connected
map HDMI cable, eliminates the need for extra cables
Resolution Up For UHD (3840 x 2160), Deep Color and HD audio formats
4K @ 60Hz 4: 2: 0
4K @ 30Hz 4: 4: 4
HDCP compatible and Blu-Ray ready
Plug-and-Play No Software Installation
Requires Best Quality Cable! No Support if not the cable is from Danbit

HDMI receiver for HDMI-MULTI-T4
Up to 70 meters with 1080p@60Hz
Input for 5VDC if cable is too long
1 x HDMI male
1 x RJ45 female for patch cable
Point to point cabling
With EDID transfer

Opløsning op til 1080p@60Hz.
Signaldistribution op til 70M.
Der kræves ingen ekstern strøm til RX -enheden.
Indbygget HDMI loop out-port på TX-enhed til en ekstra HDMI-skærm.
Kan stakkes til en anden TX for 1 in 8/12 out.
Understøtter RS232, CEC, EDID -styring.
Understøtter RS232 -kontrol.

4K HDMI Extender Over Patch Cable
HDMI 1.4 / HDCP 1.2
Up to 120 meters
4K @ 30 Hz
One-to-One or One-To-Many
Max 12 RX Can be connected one TX (Daisy Chain)
120m Cat 6 / 100m Cat 5e
remote control IR from RX to TX
Plug and Play
Power supply: 5V 1A to USB port (2 pcs supplied)
Dimensions: 100 x 85 x 25 mm
Operating temperature: -15 - + 55 ° C
Extra receivers can be purchased BOOST-HDMI120-4K30RX

Receives HDMI video signal via Cat.6A cable up to 100 meters
Resolution: 4K @ 60Hz 4: 2: 0)
Resolution: 4K @ 30Hz 4: 4: 4
Full HD (1920 x 1080)
User hdbaset technology
PoE (POH) - only a power supply of the receiver unit.
HDCP compliant and ready for Blu-ray
Supports IR remote
automatic power saving function (can selectable)
Plug and Play, no software installation
Powered by 48VDC
Dimensions: 140 x 85 x 34 mm
REQUIRE THE BEST QUALITY CABLE! No support if the cord is not from Danbit

Transmits uncompressed HD video and audio over CAT6a / 7 cable up to 100 meters
Can be powered monitors or receivers with hdbaset with PSE
PSE is the equipment that sends PoE out on RJ45 port
Power from mini-USB with no PSE connected
Map HDMI cable, eliminating the need for extra cables
Resolution up to UHD (3840 x 2160), Deep Color and HD Audio formats
4K @ 60Hz 4: 2 : 0
4K @ 30Hz 4: 4: 4
HDCP compliant and Blu-ray ready
Plug and Play no software installation
Compact size.
Easy to install
REQUIRE THE BEST QUALITY CABLE! No support if the cord is from Danbit

4K HDMI Extender over the patch cable
PoC (Power Over Cable) - Power supply to be one party TX or RX
2.0b HDMI / HDCP 2.2 / 1.4
up to 120 meters
4096 x 2160 @ 60Hz (120m), 1920 x 1080 @ 60 Hz (150m)
4K @ 50 / 60Hz 4:4:4
1080p @ 120Hz
Remote-IR in both directions
TX: HDMI in, HDMI out, IR Input + out (3.5mm jack), DC in, RJ45, RS232
RX: HDMI out, audio out, IR Input + out (3.5mm jack), RJ45, RS232
Plug and Play
Power supply: 24V 1A (1 pc included)
Dimensions: 157 x 90 x 20 mm | Weight: 333g
Operating temperature: 0 - + 40 ° C
Humidity: 20 - 90% RH (no condensation)

4k HDMI up to 100 meters
Supports HDMI 1.4a
Supports 3D format
infrared control
3.5mm audio input
2 pcs. PSU included
good quality