With one of these converters, you can convert an RS232 signal to RS422 or 485 which is the smallest converter available on the market. Det er en fast og effektiv løsning for fjernrestriktioner. It requires no software and can be easily used. The converter has an auto-built hardware that allows both connected devices to prevent data transmission at the same time. With a DIP switch, you can easily configure the interface for RS232 or RS485....
With one of these converters, you can convert an RS232 signal to RS422 or 485 which is the smallest converter available on the market. Det er en fast og effektiv løsning for fjernrestriktioner. It requires no software and can be easily used. The converter has an auto-built hardware that allows both connected devices to prevent data transmission at the same time. With a DIP switch, you can easily configure the interface for RS232 or RS485. With the RS485 Echo mode, you can make sure that outputs can function as input signals. Therefore, you do not have to read echo data to find out if broken data is being sent.
There are 14 products.
Active filters
Moxa A53, DB9 W/ADAPTER
Optoisolated RS232 for RS422 / 485 Converter
3000vdc isolation
Up to 1.2 km on the RS422 / RS485
1.2kbit/s to 115.2 kbit/s, automatic baud rate
DB9 female connector for RS232 Signal
Screw terminals for RS422 / 485 signals
Supply 10 to 30 VDC
RS485 for RS232 or RS422 for RS232
optoisulated RS232 for RS422 / 485 Converter
supply voltage is isolated against RS232 page
Supply voltage is isolated against RS485 / 422 page
Automatic Baud rate control
With CNV232-485PW + you get an RS485 or RS422 port on the PC
Selecting RS422 or RS485 with DIL switches on the device
Super compact with DB9 female and screw terminals
Can be powered by external voltage from 9 - 12VDC / 500mA
Operating temperature: -40 - + 85 ° C
RS485 & nbsp; recoverable RS232 controller / converter
Link to 3 x RS232 units from 1 x RS485 bus
Baud speed 300 bit/s to 115,200 bit/s
10 V DC to + 30 V DC
Dual watchdog
256 KB SRAM buffer
1 x & nbsp; RS485 address per. serial interface
Operating temperature: -25 ° to + 75 ° C
For DIN rail mounting
Optoisolated RS-232 for RS485 converter
3kVDC isolation on RS232 from DC input
ESD protection for RS232 / 485
Baud rate 300 bit / s to 115,200 bit / s
Supports power inputs of +10 V DC to +30 V DC
Operating temperature: -25 ° to + 75 ° C
For DIN rail mounting
RS232-RS422/485 konverter
Hastighed: 230.4 kBit/s
RTS/CTS support
Til DIN og vægmontage
Plug-in terminal block til RS422/485
Industrial RS232 to 422/RS485 Serial Converter/ Repeater with 2 KV Isolation, MOXA TCC-100i
RS-232 to RS-422 conversion with RTS/CTS support
RS-232 to 2-wire or 4-wire RS-485 conversion
2 KV isolation protection (TCC-100I/TCC-100I-T)
Wall and DIN-rail mounting
Plug-in terminal block for easy RS-422/485 wiring
LED indicators for power, Tx, Rx
-20 to 60°C operating temperature
RS232-RS422/RS485 konverter
Op til 115,2 kbit/s
Afstand: Op til 1,2km på RS422/485. op til 15 m på RS232
Forsyning: 9 VDC, 100mA, strømforsyning medfølger
Stik: RS232:DB25F,
RS485: Skrueterminal og RJ11
ONLY one-way communication - from input to 4 x output
Sending data to 4 RS485 ports at the same time - star coupling
1 x RS232 and 2 x RS485 (screw terminal) as input
Converts RS232 for RS485 2-wire
Only one input can be active at a time
Can be connected to multiple serial splitter boxes to max. 32 x RS485 outputs
Optoisolerede RS232 til RS422/485 konverter
3000Vdc isolation
24Vdc, 1.2W
RS-232 (DB9)
RS485 (2-Wire) eller RS422 (4-Wire)
Speed (bps): 1.200, 2.400, 4.800, 9.600,
19.2 k, 38.4 k, 57.6 k, 115.2 k
RTS control and RS-422 (switchable)
Optiskt isolerad RS232-adapter, max. 115,2 kbps, automatisk flödeskontroll, DB9-kontakt
Bi-directional RS232 to RS422 converter
Galvanic isolation
DB9 male / 12VDC power supply included
RS232 for RS485 converter
Opto-insulated
Galvanic isolation between DC input and RS232 port
Supply voltage: 9 - 50VDC, 10 - 34VAC
Automatic flow control
Up to 1.2km Built-in Termination Resistance - Can be Disconnected
Screw Terminals
