Electronic locks / Alarms / Access Systems

Compact motorized lock with separate pal
Locked without power
releases the locking pawl by transient voltage
two lock entrances
Can be mounted in 2 different ways
Control voltage - 12 - 28VDC / VAC max. 165mA
Dimensions: 60 x 60 x 22mm

Miniature electronic holding magnet for cabinets
Supply voltage 12 VDC, minimum 140mA
Holding force: Up to 36 kg
with Bond sensor - Relay output COM, NC
Bond sensor is a closed indicator - Can inform the controller
Operating temperature: -10 ~ 55ºC
IP65 Stainless steel with epoxy filling
Magnet dimensions: 70 x 38 x 26 mm
Holding plate dimensions: 80 x 32 x 18.5 mm
Weight 350 g

Door magnet with holding power up to 545kg
Stainless steel cabinet fully sealed with epoxy
Supply voltage for team: 12/24VDC 6Watt
At 12V connect red to white, yellow to black
At 24V connect white to yellow. Red + Black -
No holding power when de-energized
Operating temperature: -10 to +55°C
Magnet: 220 x 68 x 42 mm
Amatur plate: 185 x 61 x 16 mm
Anti magnetic function
Weight: approx. 5 kg

Tilbehøt to DOOR-MAGNET-MINI
bracket for mounting the door magnet on the side of the frame
Strong Aluminum

Rev: LO

Door status Red / green LED light indicator. 12 / 24VDC /1.2Watt.

door magnet with clamping force up to 545kg
Rusrfri steel cabinet full sealed with epoxy and is vandal proof
Equipped with thread for flexible tube to protect the cable
Supply voltage for team: 12VDC or 24VDC, 6Watt
Cable change-over between 12 and 24 VDC
Only holding force when energized
With Bond Sensor (Lock indicator)
Operating temperature: -10 to + 55°C
Magnetic: 220 x 62 x 41 mm
Door-plate: 185 x 61 x 16 mm
Anti-magnetic feature
Weight: ca. 5 kg

The door magnet with holding force up to 136 kg
stainless steel housing full sealed with epoxy
Voltage for holding: 12VDC 6 Watt
No holding force at voltageless
Operating temperature: -10 to +55°C
Magnet: 170 x 32 x 24 mm
Amaturple plate: 152 x 32 x 10 mm
Anti magnetic function
Weight: Approx. 2.5 kg

Door magnet with team power up to 272kg
stainless steel and vandal safe
IP65 - Designed for harsh outdoor environment
Supply voltage: 12VDC or 24VDC 6WATT
Prepared for 12 and 24VDC - view Label unit.
No holding force at zero voltage
Dim: 218 x 44 x 27.5 mm
Dim plate for door: 185 x 38 x 12 mm
Operating temperature: -10 to + 55 ° C
Weight: 1.5kg
Buying access system - see accessories

Tilbehør til tyverialarm ALARM-GSM-BASE
Indstrålingsbeskyttet
Detektionsafstand 6-8 meter
360 graders vinkel måling
installationshøjde 3-5 meters
Forsynes med 3.6V lithium batteri

door magnet with clamping force up to 272kg
Aluminum housing and vandal proof
Supply voltage for team: 12VDC or 24VDC, 0.5A / 0,25A
Automatic switching between 12 and 24VDC
No holding power at any voltage
Operating temperature: -10 to + 55°C
Magnetic: 250 x 44 x 26 mm
Door-plate: 185 x 38 x 12 mm
Mounting plate for the frame: 250 x 26 x 5.5 mm
Anti magnetic function

NOTE: Contract with Danbit A / S and User Agreement with service supplier MUST be established before purchase!

Payment system with touch display.
accept contactless, chip, magnetic stripe and mobilepay.
GSM antenna connector MMCX to 6 digital outputs. Can be programmed with the time difference when paying. To 6 deaktiveringsindgang2. Can be configured to disable the machine
can be connected to a vending machine, washing machine, door, etc.
Web-based control panel.
Communications Internet or WiFi or 4G
Support for setup can be purchased.
Supplied with SIM card (4G)
Supply voltage: 10 - 24VDC, 10 - 42VAC / 2Amp (power supply included)

Mounting angle for DOOR-MAGNET-V8 for outward-facing door. The angle clamp is mounted on the lower edge of the door frame.
It is very important that the anchor plate is mounted floating suspended and that it can come into 100% contact with the holding magnet.

Accessories for DOOR-MAGNET-LOCK
angle fittings for outward door (outswing)
The kit consists of 1 part
heavy aluminum profile
Dim: See drawing

Accessories for DOOR-MAGNET-LOCK6
The kit consists of 3 parts
heavy aluminum profiles
target: See drawing

Accessories for door-magnet-mi
z-angle brackets for inward door (Inswing)
The kit consists of 3 parts
heavy aluminum profiles
target: See drawing

For 19mm mounting hole
12VDC
IP65
NO/COM/NC
​Momentary reset
Metal

Stand-alone access control in IP68 sealed housing

ADGANG20-RFID is a stand-alone access control that can control an electronic door lock.
Identification: Via keyboard or RFID EM card/chip.
User capacity: Max. 2000 users.
Identification time: < 20 ms.
RFID Reader: EM type for 125 kHz.
Checking the door lock:
Relay output with make and break function 12VDC or 24VDC / 6Watt
Housing: IP68 sealed stainless metal housing

Technically demanding product - Support hours can be purchased additionally

Electric endplate 70mm
Error-proof - not suitable for back pressure
Quick and easy installation
Static holding force & nbsp; 454 kg
12VDC
Dimensions: 70 x 43 x 25mm

Monteringsboks til mikrobølgebarriere