![](https://debugger.danbit.dk/demo/10360-large_default/hd-hdmi-extender-over-ip-med-poe-digital-signage-sendermodul-hdmi.jpg)
![5VDC 2 Amp (10Watt) power...](https://debugger.danbit.dk/demo/306-home_default/netadapter-5v-dc-2a-reguleret-power-supply.jpg)
5VDC 2 Amp (10Watt) power adapter from 100 - 240VAC. DC plug: 5.5 / 2.1mm
Switch mode type
100 - 240VAC to & nbsp; 5 VDC, 2 A
DC plug: 5.5 / 2.1mm
HDMI video transmitter PoE
Suitable for video wall
With HDMI Loop Out
Delay of approx. 1 second from transmitter to receiver
HDMI 1.4a - H.264
By IP multicast use switch with IGMP Snooping
Range up to 100m
Cables Kat. 5th / 6
EDID Emulation
IR Transfer
1 x RJ45, 1 x DB-9, 1 x HDMI Input, 1 x HDMI Output
Supply IEEE 802.3af / at PoE +; 5V DC, 2A (not supplied)
As receiver, use HDMI-MULTI-HD-M
HDMI extender over IP med PoE leverer en fantastisk full HD videodistributionsløsning.
Skal bruges sammen med et eller flere modtagermoduler HDMI-MULTI-HD-R
Switch mode type
100 - 240VAC to & nbsp; 5 VDC, 2 A
DC plug: 5.5 / 2.1mm
HDMI Video Receiver with PoE
Transmitter Module is purchased: HDMI-Multi-HD-T
Video Wall with a maximum of 64 units
H.264 Video Encoder / Decoder, IR transfer
Delay of approximately 1 second from transmitter to receiver
HDMI 1.4a
Connection over IP - Use switch with IGMP Snooping
Max. 64 Groups
Range Up to 100m - Point to Switch or to Transmitter
Cables Cat 6a. Good quality
Edid Emulation - possibly not on all screens, then buy it from Danbit
1 x RJ45, 1 x DB-9, 1 x HDMI exits
Supply IEEE 802.3AF / to POE + or 5V DC, 2a (not included)
Requires quality switch When used over IP
Dim: 130 x 82 x 30 mm
Opløsning op til 1080p@60Hz.
Signaldistribution op til 70M.
Der kræves ingen ekstern strøm til RX -enheden.
Indbygget HDMI loop out-port på TX-enhed til en ekstra HDMI-skærm.
Kan stakkes til en anden TX for 1 in 8/12 out.
Understøtter RS232, CEC, EDID -styring.
Understøtter RS232 -kontrol.
Digital ljud konverter til 2 x analog phono stik
KVM extender over single-mode fiber
simplex fiber (1 fiber) with SC connector
set with transmitter (TX) and receiver (RX)
HDMI-A 1.3, HDCP 1.2
1920 x 1080 @ 60Hz
HDMI Exit to local screen on transmitter
2 x USB-A 2.0 female on receiver for keyboard, mouse
USB 2.0, can accept USB hub to HID devices
Power Supply: 5VDC / 1A (supplied for transmitter and receiver)
Dimensions: 113 x 80 x 28mm
Operating temperature: -5 - + 70 ℃
HDMI Video Receiver with PoE
Transmitter Module is purchased: HDMI-Multi-HD-T
Video Wall with a maximum of 64 units
H.264 Video Encoder / Decoder, IR transfer
Delay of approximately 1 second from transmitter to receiver
HDMI 1.4a
Connection over IP - Use switch with IGMP Snooping
Max. 64 Groups
Range Up to 100m - Point to Switch or to Transmitter
Cables Cat 6a. Good quality
Edid Emulation - possibly not on all screens, then buy it from Danbit
1 x RJ45, 1 x DB-9, 1 x HDMI exits
Supply IEEE 802.3AF / to POE + or 5V DC, 2a (not included)
Requires quality switch When used over IP
Dim: 130 x 82 x 30 mm