The temperature and humidity sensor with RS485, -40 to + 85 ° C, 0-100% relative humidity, MODBUS, daisy-chain

Combination sensor for temperature and humidity measurement
Modbus RTU
2 x RJ45 connector - with daisy chain to the next module
RS485 Bus to Controller.
Up to 32 devices can be connected Controller
3.0% relative humidity measurement accuracy
12 bit resolution for humidity measurement
14 bit resolution for temperature measurement
With the mounting flanges
Excellent long term stability
Each module has its own ID code

TSH300
876.00 DKK
Tax excluded
Quantity
Physically in stock  

  • Download PDF
  • file_download Downloads
  • live_help Ask a question

TSH300 is a humidity and temperature sensor with RS485, and the power is supplied from Teracom controller. It is operated via the interface. The sensor is an excellent solution for moistureproofness and temperature measurement. Humidity & Enheperaturføleren has built-in signal processing and provides a fully calibrated digital output. This results in superior quality measurement. It is aimed at applications that require precise humidity and temperature monitoring - server rooms, offices and food stores, etc. It is also suitable for smart office applications.

TSH300 communicate with controllers over an RS485 interface. Each sensor has a unique serial number that allows multiple sensors to support the same RS485 bus.
RS485 humidity and temperature sensor uses two RJ45 connectors for cascading to the next sensor. Standard UTP / FTP Patch LAN cable can be used for interconnection between the sensors and the controller. A special accessory that allows easy installation in 19 "cabinets can be ordered separately.

4 other products in the same category:

Temperature sensor with...

Temperature sensor with RS485, -20 to +60°C, Modbus RTU interface, 14 bit resolution, cascade connection

Temperature sensor TST300V2 with RS485 interface
±0.13°C accuracy from +20°C to +60°C
14 bit resolution
2 x RJ45 for daisy chain connection to the next sensor
IP20 sealed housing
Low power consumption
Modbus address table: see TST300 manual
Log in to danbit.dk and press DOWNLOADS

MODBUS RTU interface

Price 748.00 DKK
Product code: TST300
Physically in stock  
Quick view
Combined CO2 and barometric...

Combined CO2 and barometric pressure sensor with a 1-wire interface for Teracom controllers

Multisensor for CO2 and barometric pressure
Interface: 1-wire (+/- and data)
LED indicator for communication status
Long-term stability based on digital signal processing
Self-calibration on fresh air for CO2 measurements
Interchangeable communication parameters
Non-volatile memory for all settings
Firmware update via the interface
Size: 81 x 81 x 30 mm
Weight: 66g
Supply voltage: 4.5 - 26VDC / Max. 150mA

Price 1,904.00 DKK
Product code: TSM400-1-CP
On the way in  
Quick view
Temperature and moisture...

Temperature and moisture meter with 1-wire. -20 - +60 ° C, 5 - 95%rh. 12-16bit resolution. IP54 Robust House

1-wire Combi Sensor
Temperature: -20 - +60 ° C +/- 0.6 ° C
Resolution: 0.1 ° C
Humidity (Moisture): 5 -95% Rh +/- 5%
Resolution 0.1%Rh
IP54 Plastic housing, very sturdy
Up to 8 sensors on the same 1-wire
16 bits at temperature
12 bits at moisture
Supply Voltage: 4.5 / 25mW
Dimensions: 74 x 66 x 36 mm

Price 1,520.00 DKK
Product code: TSH230
On the way in  
Quick view
Temperature and humidity...

Temperature and humidity sensor with a MODBUS RTU RS485 interface.

Temperature and Humidity sensor
RS485 MODBUS RTU
Temperature: +/-0,4 °C (-10 to +60°C), max. +/-0,6°C
Resolution: 0,1°C 
Humidity: +/-3,0% RH (20 - 80% RH), max. +/-5% RH
Resolution: 0,1% RH
Supply voltage: 4,5 - 26VDC
LED indicator for status of communication
Long-term stability based on digital signal processing
RS-485 interface (2-wire) carrying up to 32 nodes
Changeable bitrate and other communication parameters
Firmware update via the interface
Size: 81 x 81 x 30 mm
Weight: 66g

Price 975.00 DKK
Product code: TSM400-4-TH
On the way in  
Quick view