Combined CO2 and barometric pressure sensor with a 1-wire interface for Teracom controllers

Multisensor for CO2 and barometric pressure
Interface: 1-wire (+/- and data)
LED indicator for communication status
Long-term stability based on digital signal processing
Self-calibration on fresh air for CO2 measurements
Interchangeable communication parameters
Non-volatile memory for all settings
Firmware update via the interface
Size: 81 x 81 x 30 mm
Weight: 66g
Supply voltage: 4.5 - 26VDC / Max. 150mA

TSM400-1-CP
1,904.00 DKK
Tax excluded
Quantity
On the way in  

  • Download PDF
  • file_download Downloads
  • live_help Ask a question

TSM400-1-CP is a multi-parameter sensor that supports the 1-Wire protocol. The sensor measures the concentration of carbon dioxide and atmospheric pressure. Both basic sensor elements, for carbon dioxide and pressure, used in the device are digital. This ensures high measurement accuracy and longterm stability. The basic sensing element for atmospheric pressure is factory calibrated and it does not require any lifetime recalibration. Automatic calibration is available for carbon dioxide measurements. TSH400-1-CP is housed in a slim plastic enclosure. The bottom part of the enclosure is suitable for installation on standard flush-mounted/cavity wall boxes ø68mm, with installation openings on 61mm.

CO2 measurements:
Range: 400 to 5000 ppm
Accuracy: ± (40 ppm +5 %)
Resolution: 1 ppm
Calibration: Automatic, if the sensor is exposed to fresh air for more than 30 minutes.

Barometric pressure measurement:
Range: 10 to 1200 hPa
Accuracy (min): ±1.5 (25°C at 750 hPa)
Accuracy (max): ±2.5 (-20°C to + 85°C, 300 to 1100 hPa)
Resolution: 1 hPa 

4 other products in the same category:

Data logger for digital and...

Data logger for digital and analog signals via Internet/LAN, 2 x DI, 2 x AI, 2 x relay output, 1-wire input, MODBUS

Stand-alone Data logger via Ethernet
Memory for 70,000 measurements
Can be programmed to log every 3 seconds
Password protected Web based configuration and control
2 x digital input "dry contact"
2 x analog inputs 0 to 10VDC, 10-bit resolution, 10mV display
Multiply and offset for analog input
2 x relay with NO/NC contacts
1-Wire interface for 8 sensors
SNMP v.2 support
SNMP traps up to 5 alarm types
MODBUS TCP/IP support
E-mail to 5 recipients in case of conditional alarm
HTTP API commands
NTP and dynamic DNS support
Remote firmware update
Supply voltage: 10 - 32VDC - purchase PSU

Price 1,722.00 DKK
Product code: TCW220
Physically in stock  
Quick view
4G LTE alarm and remote...

4G LTE alarm and remote control, 2 x Digital input, 2 x Analog, 2 x Relay output, 1-wire for sensor, MQTT, 8 - 32VDC

GSM / LTE alarm - 4G
Configuration via USB (Windows program) or SMS
2 x digital inputs with "dry contact" or "logic level" mode
2 x analog input from 0 to 60VDC, 10 bits
2 x relay output with NO / NC switches
1-Wire interface for 4 Teracom temperature and humidity sensors
Input can be navigated with alarm text etc.
SMS alarm - up to 5 numbers
Email alarm - up to 5 email recipients, SMTP with TLS support
1 relay can be activated with calls from up to 100 telephone numbers
Push mode - XML data is sent via HTTP Post to a remote server. Server response may include relay setup.
MQTT 3.1.1 support
Firmware update "on air"
Supply voltage: 8 - 32VDC, 2Watt - additional PSU
Dimensions: 109 x 65 x 32 mm
Weight: 152g

Price 2,212.00 DKK
Product code: TCG120-4E
Physically in stock  
Quick view