![](https://debugger.danbit.dk/demo/17724-large_default/product-title.jpg)
![I/O-modul 6 digitale input...](https://debugger.danbit.dk/demo/6028-home_default/i-o-modul-6-digitale-input-og-6-relaeer-modbus-digital.jpg)
I/O-modul 6 digitale input og 6 relæer, MODBUS
Ethernet to 6 Channel Isolated Digital Input / 6 Relay
Modbus TCP
Peer-to-peer fashion
8 Potential-free relay outputs - 230Vac / 16 A, 24VDC / 10 A
Relay outputs are individually via HTTPS, SNMP or Command
Startup delay from 0 to 9999 seconds. Adjusted individually
Inrush Delay is set to 1 second
Programmable on / off sequence
Activating relays can be controlled from sensor or inputs
8 channel watchdog via ICMP / TCP Ping
8 signal entrances From NO and NC units, door contacts, etc.
Entrance to sensors Temperature, humidity and air pressure
Messages via e-mail, Sylog and SNMP Trap MQTT
Depending on thresholds for sensor measurement and signal input
LED display for overall power, IP address, sensor data and error reports
Android app and iOS app
DIN bracket
Is an intelligent remote control system that allows the user for comprehensive control options via a TCP / IP network. The device has 8 individually changeable relay outputs and 8 passive signal inputs for polling NO / NC units (eg, smoke detectors and door contacts). Thanks to sensor connection (RJ45), the external I / O system can be expanded with plug-n-play sensors to ambient temperature, humidity and air pressure and leakage monitoring.
In addition to communication via MQTT, telnet, radius and Modbus TCP supported Modern safety standards such as SNMPv3, SSL, SSH and IPv6.
Can be easily mounted on your rail and enables control and monitoring of professional AV and IT installations in no time. The smart monitoring system offers comprehensive control options required for reliable unit control and environmental monitoring. It can easily be integrated into monitoring software from leading suppliers (PRTG, Domotz, Icinga, Nagios, Power IQ, Tivoli).
Ethernet to 6 Channel Isolated Digital Input / 6 Relay
Modbus TCP
Peer-to-peer fashion
Intelligent Controller with Webserver
Logical functions such as: IF-THEN-ELSE
No programming. Just pick, click and finished
Supports: I/O module, counter, timer, email
Modbus/TCP protocol to SCADA software seamless integration
IEEE 802.3af compliant Power over Ethernet ( PoE)
1 x RJ45 - 10 / 100Mbit Ethernet
8 x Power relay output, COM NO
Relay switch: 30VDC, 250VAC 5A, only resistive load
Supply voltage: PoE or 12 - 48VDC / 5.5Watt
Ethernet I/O module Modbus/TCP / UDP slave
1 x RJ45 Ethernet
Redundant Power Supply
Protocol: TCP, UDP, HTTP, DHCP, BOOTP and TFTP
Web configuration and firmware update via Ethernet
2 x digital input (Wet - volts supplied)
2 x Relay, COM, NO - 250VAC 5A, 30VDC 5A
Avoid inductive load to relay contacts
With locked DI and 32-bit 3.5kHz counter
With I/O pair - input is mirrored in the other's output
Dual-watchdog with Power-on-safe value
Supply voltage: 12 - 48VDC, 1.7 Watt
Dimensions: 98 x 52 x 27 mm
Operating temperature: -25 - +75°C
Power or Voltage Output
0 - +10VDC, 0 - 20mA, 4 - 20mA
Resolution: 12-bit
Software Selectable Power or Voltage Output
Output Cable Detector for Power Output (4 - 20mA)
Backlink Voltage or Current
Configurable Power-on Value
Configurable Safe Value
3000 VDC Intra Module Isolation
Programmable Output Slope
Dual Watchdog
Temperature Range: -25 to +75°C