Light, temperature and humidity sensor with RTU MODBUS / TCP, Ethernet, RS485, ceiling-mounting IP20. unit to Energy Management

The indoor light-gauge, temperature and humidity sensor 3 in 1
For energy optimization and building automation systems
Measuring range of illumination: 0 to 20,000 lux
Temperature Range: -20 to + 60 ° C
humidity Measuring range: 0 to 100% RH
Supports DCON and Modbus RTU / TCP protocols
Supports MQTT protocol Ethernet interface
With RS485 / RJ45 Ethernet communications interface
Relay output - 6 Amp @ 250VAC
Power supply: PoE and 10 - 48VDC, ca. 2 Watt
Operating temperature: 0 - + 75 ° C
web configuration and firmware update via Ethernet
Ceiling Mounting

ET-LUXMULTI-I
1,429.00 DKK
Tax excluded
Quantity
On the way in  

  • Download PDF
  • file_download Downloads
  • live_help Ask a question

ET-LUXMULTI-I can be used for measuring indoor lighting, temperature and humidity. A wide variety of interface connections may be selected to suit individual needs, including RS-485 / Ethernet. With DCON- and Modbus RTU / TCP protocols and can be easily integrated into existing HMI / SCADA / central control.
The screwless quick connectors, DIP switch and rotary switch makes the unit easy to install, repair and maintain. The white design ensures that the device is easy to match with the decor. With 3G / 4G we communicate module and electric curtain control these can easily set up via a simple web interface and logic control.
two-way interconnected devices integrates the electric curtains and Building Management System (BMS) and collect sensitive environmental data simultaneously. When detected indoor temperature or humidity rises or the sun's intensity is strong, the module will notify management system which automatically activates the electric forhængs pulling motion or activate a personal scenario to control all curtains or specifically curtain combinations. In addition, the user can edit
scenario and set up the curtain automation at scheduled times.

Rev: LO

4 other products in the same category:

High Speed ​​8 analog...

High Speed ​​8 analog inputs 200 kHz sample rate, 16-bit, 4 digital outputs, 4 digital inputs, -25 - + 75 ° C, PoE, 12-48VDC

8 single ended input +/- 10V analog, +/- 5V
200kS / s (200 kHz) for each channel sampling rate
FIFO 2000 is sampled - the memory of 30 million data samples
16bit solution
Trigger mode: SW, Ext. clock, digital falling edge (post, pre, delay), analog
1 x 32-bit counter, max. 30 kHz
4 x digital input (wet) up to + 30VDC
4 x digital output (Open Collector) up to + 30VDC, 100mA
Overload protection up to 1.3A
1 x Ethernet port RJ45
Security: ID, password and IP filter
Powered by the PoE or 12 - 48VDC, 2,6W
Dimensions: 120 x 76 x 38 mm
Housing: Metal, with DIN bracket
Operating temperature: -25 - + 75 ° C

Price 6,347.00 DKK
Product code: ETHIO8AI8IO-P-I
On the way in  
Quick view
Ethernet module with 2...

Ethernet module with 2 contact inputs, 1 relay output, PoE

Ethernet module with 2 digital inputs and 1 relay output
2 x digital dry contact - active high by connecting contact
1 x Power relay, 250vac / 5a, 30vdc / 5a
Avoid inductive load to relay
P2P Function that reflects an input to other module output
Supports Modbus / TCP and UDP Slave
Power supplied from PoE or 12 - 48VDC
PoE: IEEE802.3af, Class 1
Operating temperature: - 25 - + 75 ° C
Dim: 98 x 52 x 27 mm
DIN bracket

Price 1,079.00 DKK
Product code: ETH-MOD2I1R-P-I
On the way in  
Quick view