Modbus TCP Server Master for M-Bus Slavs Gateway. Supports up to 100 M-bus units. 1 x RJ45, 1 x RS232, M-Bus

Supports M-Bus Standard: EN-13757, CJ / T -188
1 x RJ45 Modbus TCP
1 x M bus for maximum 100 slaves
M-Bus Power limiter
1 X RS232 for firmware update
Modbus TCP / RTU Function code 0x03 and 0x04 To read measurement data
Baud rate: DIP switch to M-Bus and serial port from 300 to 115200 BPS. Standard M-Bus port- Data format: data bit 8, parity straight, stop bit 1
supports up to 100 m bus slaves
m-bus power protection
short circuit protection on M-bus
Firmware updates via serial port
gives PWR, MTX and MRX 3 LED Indicators
Wall Mounting
Dim: 123 x 102 x 40 mm
Supply voltage: 10 - 30VDC

ETH-MOD-MBUS-I
3,455.00 DKK
Tax excluded
Quantity
On the way in  

  • Download PDF
  • file_download Downloads
  • live_help Ask a question

M-Bus (Meter-Bus) is a communication interface that is widely used in different meters, eg. Electric meters, water meters, heat meters, etc. Easy installation (two-wire system includes power and communication function) and robustness are the most important features. M-Bus has its own physical layer and protocol. Therefore, it is usually changed to other systems, e.g. Modbus, to facilitate overall use.
In automation, Modbus TCP is one of the most common communication standards. The manufacturer developed the gateway ETH-MOD-MBUS-I for Modbus TCP for M-Bus, enables direct transmission of meter data to a control system using Modbus TCP. ETH-MOD-MBUS-I supports operating up to 100 units on M-Bus. After an initial configuration of the M-Bus tool, ETH-MOD-MBUS I will read the measurement data autonomously. The PLC or PC as a Modbus TCP client can easily access measurement data via a TCP connection.

4 other products in the same category:

Web enabled temperature and...

Web enabled temperature and humidity module for 4 x 1-wire sensors. Up to 64 lsensors w/log. RTC, Modbus/TCP/IP, XML. PoE.

WEB-based data logger for temperature and humidity sensors
Can be programmed to 3 second sampling time
-55 - + 125°C, -40 - + 80°C 0 - 100%rH
4 pcs. 1-Wire bus for 16 sensors, each
Max. 64 pcs. temperature or temperature/humidity sensors
Max. distance to sensors: 180 meters
Tasks: 50 scheduled, 50 Conditional, 20 override
Email alerts, custom (encrypted email servers, such as gmail)
Real-time clock with NTP server synchronization
No software required
Configurable logging
Graph (logged data)
HTTPS/TLS encrypted
Static or DHCP IP address configuration
Modbus, SNMP, Remote Service, IP filtering
On-site is updated
For DIN rail / wall
Supply voltage: PoE or 9 - 28VDC, 134mA
Dimensions: 98 x 78 x 36 mm

Price 4,341.00 DKK
Product code: X-406-E
On the way in  
Quick view
1 channel leak detector...

1 channel leak detector MODBUS RTU, RS485, alarm relay, Sensitivity adjustment. DIN -25 - +75°C 10 - 30VDC 1.5W

1 channel detection of fluid leakage with MODBUS
Shutter local alarm of detection of water leakage
Acoustic alarm - adjustable
RS485 2-wire MODBUS RTU
2 x LED indicators for power and alarm
Relay output for alarm for water leakage - 30VDC / 2A
Monitor cable for liquid detector
Sensor cable can be up to 500 meters
Sensitivity is adjustable
Supports DCON and Modbus RTU protocols
Embedded Dual Watchdog
Operating temperature: -25 to + 75 ° C
Small form factor with DIN bracket
Dimensions: 83 x 70 x 29 mm
Operating voltage: 10 - 30VDC

Price 562.00 DKK
Product code: M485-LEAK1-I
On the way in  
Quick view
2 x analog input for strain...

2 x analog input for strain gauge 4-wire, 1 x excitation OUT 0 - + 10VDC, 1 x Di and 4 x Do, RS485 bus. 10 - 30VDC.

RS485 module with 2-channel strain gauge gauge
high resolution: 16-bit
excitation voltage range: 0 ~ +10 V.
50 Hz Event counter (digital input)
high / low alarm (Digital Output)
Linear Map Function
3000 VDC Intra Module Isolation
Double Watchdog
Temperature Area: -25 to + 75 ° C
Supply Voltage: 10 - 30vdc
Dim: 123 x 76 x 35 mm

Price 2,658.00 DKK
Product code: M485-AD16DA12-I
Physically in stock  
Quick view
Web-enabled temperature and...

Web-enabled temperature and moisture module for 1-wire sensors. Up to 16 logging sensors. RTC, ModbusTCP/IP, XML. PoE.

Web-based temperature and moisture data loggs
1-wire bus for a maximum of 16 sensors (Temp / Moisture)
Permissions: Administrator, Manager, User
Tasks
50 Scheduled
50 Conditional
20 Override Schemes
Email Alarms, Custom (Encrypted Email Servers, such as Gmail)
Real Time Clock With NTP Server Synchronization
No Software Required
Basic Script Support for Advanced Flexibility
Configurable logging
Graph (logged data)
HTTPS / TLS encrypted
static or DHCP IP address configuration
Modbus, SNMP, Remote Service, IP filtration
On-site updates
Robust cabinet for DIN rail / wall
Supply voltage: POE or 9 - 28VDC, 134mA

Price 3,725.00 DKK
Product code: X-405-E
Physically in stock  
Quick view