Accessories

Fiber hætte til SC Duplex stik på patchpanel

Perforated PCI Back plate
holes for ventilation
Standard profile

6 screws per package

AK-CH-S1, pakning á 6 stk.

60 x 60 x 25 mm fan
12 VDC fan
0,15A / 1.8W power consumption
With ball bearings
With thermoregulation
3 pin / molex

Tråd-gitter til 40 x 40mm blæser

90 x 90 x 25 mm fan
built-in thermo sensor
Automatic speed control determined by temperature
12 VDC 3.12 watts
with ball bearings
3 pole with taco pulses for motherboard (yellow)
Molex 4 pole for ATX PSU 12VDC

Wire grid for 80 x 80mm fan

SC fiber plug
Multimode
Simplex

40 x 40 x 10mm
12 VDC fan with ball bearings
6000rpm
25dB
Without thermoregulation
UL, CUL, TUV, CE
Molex connector

Samlestik, SC, Simplex, Singlemode

Track 19 "mounting to 8 x C13 sockets
Displays current, voltage and power
Fixed 2m cable for power supply with IEC 63309-2 blue 32A three pole receptacle (Ø56mm)
Length 64 cm

Cooling fan for 5VDC 0.25A
40 x 40 x 10 mm
3-pin cable
5000 rpm

120 x 120 x 25mm.
Tachometer
Ball bearings
3-Pin
12VDC 4.8W
153m³/h

Tråd-gitter til 120 x 120mm blæser

19" blindplader til afdækning

Strømskinne til montering i 19” rackskabe
8 x C-13 hunstik       
Viser strøm, spænding og effekt. 
Viser totale forbrug i kWh.
Kan ikke nulstilles
Fastmonteret 2m kabel til strømtilførsel med IEC 60309-2 CEE blå 16A 3 polet hanstik (Ø44mm)

19" blindplader til afdækning

Strømskinne med 8 EDB-stik til rack mount

3 pin to 2 pin adapter with CB-32C connector
Connect 2 pin connections to standard 3 pin fan adapter.

Tilbehør: 19" konsoller

Tilbehør til rackskabe. 1U høj blændplade

80 x 80 x 15 mm
12 VDC fan
​Ball bearings
Tachometer
0.95m³/min
34dB-A
7-13.8V

2U 19" blind plate

12 VDC fan with ball bearings
30 x 30 x10mm
22dBA or more
0.96W
8000 RPM max.
3pin Molex 

Regulates pressure and humidity

16 mm screw

Stainless steel

Nut included

Tråd-gitter til 90 x 90mm blæser

Tilbehør til industrikabinetter og rackskabe

Tilbehør til rackskabe. 2U høj kabelholder

Accessories for rack cabinets. Black 19 "blank panel 2U high

RACK CABINETS sent by courier!

Cable holder for 19 "rack cabinet, black

Compact design
Wide adjustment range
DIN Rail mountable 35mm 
Thermostat 0 to 60 °C
Snap-Action Contact
Housing plastic, UL 94V-0, light gray
Max. inrush current AC 16 A for 10 seconds
Max. switching capacity NC: 10 A resistive / 2 A inductive @ AC 250 V, NO: 5A resistive / 2A inductive@250V 15A resistive/2A inductive@AC120V DC30W(DC24-72V)
IP20
Dimensions 60 x 33 x 43

RACK screws and nuts for rack cabinet

Note: 6mm screws and nuts

Black nuts for cabinets and rack

Power rail for mounting in 19" Rack cabinet
mounting brackets can be turned opposite
8 round outlet (with female connector and earth)
mounted with 3 m power cable with computer connector
to 19" rack and wall mounting

C19 mains plug up to 16A
For 3-wire mains cable
Used for UPSs and PDUs

Teleskopskinner til montering af kabinet i rackskab, et sæt teleskopskinner, fylder 1U, sort

Shelf for fixed mounting in 19 "rack cabinet, 80cm deep, black

Regulate pressure and humidity

12 mm screw

Stainless steel

Nut included

SFX PSU to ATX(PS2) mounting holes
Designed for use in most ATX or Micro-ATX cases
150mm (L) x10mm (H) x 86mm (W)
5.91" (L) x 0.39" (H) x 3.39" (W)
0.8mm

19” hylde udført i stål
1U
650 x 495 x 50mm (D x B x H)
Sort
Medfølger: Skruer, møtrikker til montering i 19" rackskab
Praktisk til løse enheder

1U front with cable entry

Connect 2 pin connections to standard 3 pin fan adapter.

Black 3U fan module for 19" rack
With 3 x FAN
ON/OFF switch on the front
Sucks air out of the rack cabinet
For 230VAC - mains cable (IEC) included
Exchangeable filter on the back of the module.
Filter is inserted
Steel house

Supply Voltage 12 Vdc
Height 40mm
DC Operation DC
Width 40mm
Depth 20mm
Power Consumption 2.04W
Maximum Current 170mA
Air Flow 21.6m³/h
Dimensions 40 x 40 x 20mm
Noise Level 33dB
Fan Speed 9000rpm
Bearing Type CeraDyna C

3U køler

Cooling fan 12V 0.40A
4-wire, 4-pin
90 x 90 x 25mm

Tilbehør til rackskabe. 19" Kabelholder 1U høj

Shelf for fixed mounting in 19 "Rack cabinet, black, 2U

Target: 485 x 300 x 88 mm (B x D x H)

max. Loading: 15kg

20 stk. skruer til 19” rackskabe og industrikabinetter

Plug-in nuts for cabinets and racks
Dimensions: Footprint 13 x 12mm
Dimensions: Screw height 5mm
Dimensions: Clip height 10mm
Dimensions: Clip lock 8mm
Measurements: Plate thickness on post 2mm
Thread: M6

NOTE. Only 6mm nut with clip for RACK post - additional purchase if necessary. counterpart - RACK-SCREW

3½" Bay med udtagelig skuffe.

Til 2½" HDD / SSD i skuffen

Teleskopskinner til montering af kabinet i rackskab, et sæt teleskopskinner, fylder 1U

19" blindplader til afdækning

19" blindplader til afdækning

230 VAC Blæser til 19” rackskab

Thermostat 0 to 60°C
Snap-Action switch
Dimensions 60 x 33 x 43
Max. starting current AC 10
Max. switching capacity NC: 10 A resistive / 2 A inductive @ AC 250 V
(Special specifiction are welcome)

70m³/h, 35dBA, 1.7W
80x80x25 mm.
without thermoregulation
ball bearings
Fan
12 VDC
DELIVERED WITHOUT GRILL!

Black 3U fan module for 19" rack
With 3 x FAN
ON/OFF switch on the front
Blows air into the rack cabinet

Fan speed 2100-2300 rpm

Blower noise 33/35dBA

Fan dimensions 120x120x25

Max. air flow 55/63CFM

Uses AC and 0.08 A

For 230VAC - mains cable (IEC) included
Replaceable filter.
Filter is inserted

Steel house

Teleskopskinner til montering af kabinet i rackskab, Et sæt teleskopskinner, fylder 1U

300 Watt PTC heating element for Temperature control
Has a built-in temperature limiter.
With fan - 45m3/hour
Supply voltage 230VAC
Screw terminals
Ambient temperature: -45 - +70°C
Dimensions: 225 x 110 x 80 mm
DIN bracket

Dimension: 126,5 x 126,4mm

Extraction shelf for mounting in 19 "Rack cabinet, black 1U
shelf Dimensions 482 x 550 x 44 mm (W x D x H)
80cm Distance rails and can be adjusted.
included: adjustable telescopic rails and screws for mounting in 19 "Rack cabinet

Sort 19” hylde udført i stål
Praktisk til løse enheder
470 - 600 x 44 mm (1U) (D x H)
Medfølger: Lås med nøgle, justerbare teleskopskinner og skruer til montering i 19” rackskab

Teleskopskinner til montering af kabinet i rackskab, Et sæt teleskopskinner i aluminium, 2U Kan benyttes til alle U højder

Black 19 ”Shelf made of steel
Practical for loose units
430 - 630 x 88 mm (2U) (d x h)
Supplied: Screws, nuts and fittings for mounting in 19" rack cabinet .
Max load: 25kg

20 stk. møtrikker til 19” rackskabe og industrikabinetter

24Vdc supply
Power 200 Watt PTC
-45 to 70℃
IP20 classification
40x47x114mm
DIN assembly 35mm
Max. 90% humidity
DELIVERED WITHOUT THERMOSTAT! Must be ordered alongside.

Dehumidifier with external moisture sensor.
Suitable for Rack cabinet up to 1.5m3
230VAC / 60Watts
Display and membrane keys for setting
RS485 interface
Peltier element and axial fan
DIN mounting

PTC Heater element with passive air flow
PTC resistor - temperature limiting
Extruded aluminum
DIN-mount bracket
110 - 240VAC - 75Watt - L, N, Gnd
Continous operation
Heating power adjust to ambient temperature
Flame retardant material
3 clamp connection
IP20

Wire grid for 70 x 70mm fan

Udtrækshylde med skinne, 100 cm

Kan købes i forskellige længder. Klik her....

ARCTIC F9 PWM - indsats med blæser

Tilbehør: 19" konsoller