Subcategories
Fiber hætte til SC Duplex stik på patchpanel
Perforated PCI Back plate
holes for ventilation
Standard profile
6 screws per package
AK-CH-S1, pakning á 6 stk.
60 x 60 x 25 mm fan
12 VDC fan
0,15A / 1.8W power consumption
With ball bearings
With thermoregulation
3 pin / molex
Tråd-gitter til 40 x 40mm blæser
90 x 90 x 25 mm fan
built-in thermo sensor
Automatic speed control determined by temperature
12 VDC 3.12 watts
with ball bearings
3 pole with taco pulses for motherboard (yellow)
Molex 4 pole for ATX PSU 12VDC
Wire grid for 80 x 80mm fan
SC fiber plug
Multimode
Simplex
40 x 40 x 10mm
12 VDC fan with ball bearings
6000rpm
25dB
Without thermoregulation
UL, CUL, TUV, CE
Molex connector
Samlestik, SC, Simplex, Singlemode
Track 19 "mounting to 8 x C13 sockets
Displays current, voltage and power
Fixed 2m cable for power supply with IEC 63309-2 blue 32A three pole receptacle (Ø56mm)
Length 64 cm
Cooling fan for 5VDC 0.25A
40 x 40 x 10 mm
3-pin cable
5000 rpm
120 x 120 x 25mm.
Tachometer
Ball bearings
3-Pin
12VDC 4.8W
153m³/h
Tråd-gitter til 120 x 120mm blæser
19" blindplader til afdækning
Strømskinne til montering i 19” rackskabe
8 x C-13 hunstik
Viser strøm, spænding og effekt.
Viser totale forbrug i kWh.
Kan ikke nulstilles
Fastmonteret 2m kabel til strømtilførsel med IEC 60309-2 CEE blå 16A 3 polet hanstik (Ø44mm)
19" blindplader til afdækning
Strømskinne med 8 EDB-stik til rack mount
3 pin to 2 pin adapter with CB-32C connector
Connect 2 pin connections to standard 3 pin fan adapter.
Tilbehør: 19" konsoller
Tilbehør til rackskabe. 1U høj blændplade
80 x 80 x 15 mm
12 VDC fan
Ball bearings
Tachometer
0.95m³/min
34dB-A
7-13.8V
12 VDC fan with ball bearings
30 x 30 x10mm
22dBA or more
0.96W
8000 RPM max.
3pin Molex
Regulates pressure and humidity
16 mm screw
Stainless steel
Nut included
Tråd-gitter til 90 x 90mm blæser
Tilbehør til industrikabinetter og rackskabe
Tilbehør til rackskabe. 2U høj kabelholder
Accessories for rack cabinets. Black 19 "blank panel 2U high
RACK CABINETS sent by courier!
Cable holder for 19 "rack cabinet, black
Compact design
Wide adjustment range
DIN Rail mountable 35mm
Thermostat 0 to 60 °C
Snap-Action Contact
Housing plastic, UL 94V-0, light gray
Max. inrush current AC 16 A for 10 seconds
Max. switching capacity NC: 10 A resistive / 2 A inductive @ AC 250 V, NO: 5A resistive / 2A inductive@250V 15A resistive/2A inductive@AC120V DC30W(DC24-72V)
IP20
Dimensions 60 x 33 x 43
RACK screws and nuts for rack cabinet
Note: 6mm screws and nuts
Black nuts for cabinets and rack
Power rail for mounting in 19" Rack cabinet
mounting brackets can be turned opposite
8 round outlet (with female connector and earth)
mounted with 3 m power cable with computer connector
to 19" rack and wall mounting
C19 mains plug up to 16A
For 3-wire mains cable
Used for UPSs and PDUs
Teleskopskinner til montering af kabinet i rackskab, et sæt teleskopskinner, fylder 1U, sort
Shelf for fixed mounting in 19 "rack cabinet, 80cm deep, black
Regulate pressure and humidity
12 mm screw
Stainless steel
Nut included
SFX PSU to ATX(PS2) mounting holes
Designed for use in most ATX or Micro-ATX cases
150mm (L) x10mm (H) x 86mm (W)
5.91" (L) x 0.39" (H) x 3.39" (W)
0.8mm
19” hylde udført i stål
1U
650 x 495 x 50mm (D x B x H)
Sort
Medfølger: Skruer, møtrikker til montering i 19" rackskab
Praktisk til løse enheder
Connect 2 pin connections to standard 3 pin fan adapter.
Black 3U fan module for 19" rack
With 3 x FAN
ON/OFF switch on the front
Sucks air out of the rack cabinet
For 230VAC - mains cable (IEC) included
Exchangeable filter on the back of the module.
Filter is inserted
Steel house
Supply Voltage 12 Vdc
Height 40mm
DC Operation DC
Width 40mm
Depth 20mm
Power Consumption 2.04W
Maximum Current 170mA
Air Flow 21.6m³/h
Dimensions 40 x 40 x 20mm
Noise Level 33dB
Fan Speed 9000rpm
Bearing Type CeraDyna C
3U køler
Cooling fan 12V 0.40A
4-wire, 4-pin
90 x 90 x 25mm
Tilbehør til rackskabe. 19" Kabelholder 1U høj
Shelf for fixed mounting in 19 "Rack cabinet, black, 2U
Target: 485 x 300 x 88 mm (B x D x H)
max. Loading: 15kg
20 stk. skruer til 19” rackskabe og industrikabinetter
