UPS with DIN bracket for control panel, electrical cabinets, rack cabinet like.
Compact all-in-one to the DIN rail UPS 500VA / 300watt
Output voltage: 230VAC / 50Hz - genuine sine wave
Line-interactive means switching at power failure (2-6ms)
Nødforsynings time: 50% load for about 12 minutes
Noise level: Less than 40 dbA at 1 meter
output voltage is sine wave
4-6 hour recharge time to 90% capacity
Auto restart on mains supply restored
Battery: 1 pc. 12V / 7Ah - see manual for life
Dimensions: 250 x 135 x 115 mm | Weight with battery: 2.8 kg
Operating temperature: 0 - + 40 ° C
To prevent loss of data during power failure. Alarm low battery and over-voltage, etc.
UPS500DIN is a compact UPS for integration in electronics enclosures, rack, automatic installations where the locally helps to protect your equipment against crashes and data loss in case of power failure. UPS provides power for several minutes, depending on power consumption:
It provides comprehensive protection in a small and economical package. Not only provides more comprehensive power protection against surges and noise on netlinjen filtered and give it a clean voltage by means of the built-in stabilizer AVR (automatic voltage stabilizer). UPS continues for clean and stable power to connected equipment while it is embedded microprocessor controller guarantees high reliability, perfect for any application for home or small office.
Estimated backup time by following load in%:
25% up to 50 minutes
50% up to 12 minutes
75% up to 7 minutes
100% up to 4 minutes
Rev: LO
1 meter DIN skinne model TS-35, med en højde på 7,5mm
Assembled before delivery! Usually in stock
2500VA UPS
Modified sine wave to 5 hours of recharging time
Alarm v. Low battery and overvoltage
Connector: 4 x IEC ed and 1 x IEC engrave.
1 x RS232 / DB9 female connector
Operating temperature: 0-40 °
Supports automatic shutdown via software download included. 4 x 12V / 12 Ah battery
Avoid data loss in the event of a power failure
Compact Tower UPS 600VA/240Watt
Line-interactive means switching on in case of mains failure (2-6ms)
Emergency supply time: 50% load for approx. 6 minutes
Noise level: Less than 40 dbA at 1 meter
Modified sine curve (stair step curve)
4 hour recharge time to 90% capacity
Auto restart when mains supply is re-established
Battery: 1 pc. 12V/7Ah - see manual for lifespan
Dimensions: 279 x 142 x 101 mm
Weight with battery: 4.2 kg
Operating temperature: 0 - + 40°C
Compact size can be desktop or wall-mounted
Excellent microprocessor control guarantees high reliability
Auto restart while AC is recovering
Simulated sine wave
Cold start function
6 outlets
2 ports USB charger 5V / 1A (Max.)
RJ45 surge protection
Touch LCD in AC & Battery mode
Universal DC UPS 12 watts
Output Voltage: 5VDC / 7.5VDC / 9VDC or 12VDC
6 different DC Jack connectors included in 5200mAh (Li-Ion batteries)
