![](https://debugger.danbit.dk/demo/16737-large_default/set-of-poe-48vdc-injector-and-12vdc-splitter-not-poe-standard.jpg)
![Restlager: Temperatursensor...](https://debugger.danbit.dk/demo/7179-home_default/restlager-temperatursensor-40-71-c-surplus-demo-products.jpg)
Restlager: Temperatursensor 40-71 °C
Husker den højeste temperatur.
Til påklæbning på strømforsyning. 39x18mm
Residual sale
1 x set of PoE injector and splitter
Injector Input: 90-240VAC, Output: 48VDC IEEE802.3AF
Injektior Ports: C6 POWER, RJ45 Data Input, RJ45 Data + PoE Output
Splitter input: PoE 13.5-60VDC, Output: 12VDC
Splitter ports: RJ45 Data + PoE input, RJ45 Data output, 5.5 mm DC Pwer Output
If, for example, an Access Point or a Bridge is installed on the ceiling just below the roof, because an external roof antenna must be installed, a lot of money can be saved on bringing the voltage supply via the Ethernet cable that is pulled from the local network up to the ceiling equipment. With the ETH-POE12, the installation of 230 V sockets on the ceiling without the use of an authorized installer is avoided. ETH-POE12 is delivered in a set consisting of power supply and splitter.
· ETH-POE12 consists of 2 parts: a power supply and a splitter
· The power supply is connected to 230 VAC and the local network (typically a switch)
· The splitter is connected to the equipment to be supplied with voltage and a regular UTP Ethernet cable (max 100 m)
· ETH-POE12 supplies 12 VDC, 1 A
· Complies with the IEEE802.3af PoE standard
Husker den højeste temperatur.
Til påklæbning på strømforsyning. 39x18mm
Dimension: 126,5 x 126,4mm
Internt SCSI fladkabel, 8 x CEN80 hunstik til 7 HDD og 1 controller, gråt, 1,6M.
Uden terminator
Restlager. Begrænset antal!
Remote switch for 2 PCs and 1 HDMI monitor.
Button on the front or remote control can be used to select the PC input.