![](https://debugger.danbit.dk/demo/7576-large_default/maling-og-styring-via-gsm-med-indbygget-batteri-backup-fjernstyring-maling-alarm-via-gsm.jpg)
![Temperature gauge with...](https://debugger.danbit.dk/demo/3433-home_default/termofler-til-male-og-styreenheden-sensorer-og-tilbehr.jpg)
Temperature gauge with Dallas DS18B20 Chip. -40 - + 60 ° C
Temperature gauge
1.8 Meter cable
Dallas DS18B20 Chip
Control via SMS messages
Alarm at power failure
Relay output for 230VAC
Universal input for temperature sensor
Note it is not guaranteed to be compatible with all Bluetooth adapters, otherwise use BLUETOOTH4USB-C
GSM device with built-in Bluetooth so the device can be configured via GSM messages sent via mobile network or Bluetooth connection
Alarm from the device can be done via SMS or empty phone call or both. GSM-IO-PWR has a maximum of 12 alarm-phone-number slots programmed into the unit. Note SMS and call record 2 phone number slots.
The universal input can be used either as analog 0 to 5 volts DC max. Digital 0 max 2 volts DC 1 over 2 volts DC max. 5 volt
or 1 temperature / humidity sensors can be connected to the device and one of which can / must activate or deactivate the relay output
via max and min limit values
Via Windows software and Bluetooth connectivity, the device can be configured from a Windows PC and setups can be downloaded and sent to the device
There is APP for Android
SIM card not included
Temperature gauge
1.8 Meter cable
Dallas DS18B20 Chip
Dual-mode support Bluetooth 5 low energy(Backward compatible BT 2.0/3.0/4.0)
Full-speed USB, USB 2.0, USB 1.1 interface
Bluetooth v5.0 specification compliant
Ultra-fast bluetooth 5.0 adapter with BT EDR (Enhanced Data Rate) support up to 3mbps transmission
Effective use range 1~20 meters. (Up to 20m in open environment)
Low power Consumption
SystemSupport:Windows7,Win8,Win8.1,Win10,Win11.
Operating Temperature:-10-50℃
Android Phone/tablet, Bluetooth mouse&keyboard, Bluetooth speaker and headset
Jack hanstik 2,5mm stereo til kabel montering
measuring range -55 ° C To + 125 ° C
Fits GSM-IO-PWR
Measure 45 x 5 mm
Temperature range -40 to 120 ° C
Moisture range 0 to 99% Target 70 x 5 mm
Fits GSM-IO-PWR
Thermal sensor for mounting incl. 10 m wire
2 x 230VAC power relay /16A – resistive load.
2 x DC switched outputs up to 40VDC/6A, also as PWM for LED, FAN, etc.
2 x independent inputs: 230VAC and up to 24VAC/24VDC, SMS alerts for power failure
SIM card and SD card
Backup battery (not included) as an option – Li-Ion 3.7V (14500)
Switch appliances on and off with SMS messages
GPRS M2M function, TCP/IP Get to directly send input status to Server
Get XML status from server to set device outputs.
Scheduled automatic switching on and off of appliances
Sends power failure warning and recovery.
Restarting appliances, such as servers.
Monitoring of 2 x A/D inputs AC/DC voltages with autodetect
4 x digital inputs DIN1, DIN2, DIN3, DIN4 for DC voltage.
Universal bus (1-wire) for temperature and humidity sensors.
Thermostat function.
Alarm function: Temperature alarm, Humidity alarm, A/D limits, DI change
Alarm in case of jamming of a GSM signal.
Up to 12 alarm numbers, each can be set for different events
Up to 1000 authorized users and 2 administrator numbers.
Bluetooth
All inputs are SO compatible
Multi-band 4G LTE Cat.1 controller, logger and alarm
Setup via USB, SMS and HTTP API
USB setup - use USB cable with Mini B male
2 digital "dry contacts". High on contact
2 analog inputs, 0 - 10VDC or 4-20mA input (10bit)
4 relay outputs, COM, NO and NC
1-Wire input for up to 8 Teracom sensors
1 x RS485 for max. 8 MODBUS RTU sensors
Data logger with 70,000 logs
Upload data to HTTP/HTTPS Post in XML/JSON
SMS alarm and Email alarm to 5 recipients
Push mode – XML data is sent via HTTP Post to a remote server. Responses from server may contain relay setup.
10 to 28VDC, 370mA @ 12VDC - additional PSU
Dimensions: 158 x 119 x 34 mm
Weight: 470g
Temperature: -20 - +55°C
CPU: 720Mhz/ 4 Core/2GB/Linux v.5.10
10/100 ethernet connection
2 x USB to USB camera, USB FLASH, USB HUb
8 x Analog ports
32 x Digital inputs
8 x Isolated digital outputs max. 24Vdc, 15mA
2 x Relay (NC NO COM) max. 10A for AC, 9~30V for DC voltage
LTE slot modem (modem purchased separately)
1 x Audio-Video output & input
SBNP v1, v2c, v3
OpenVPN, SSL, HTTPS
DHCP, HTTP, DynDNS, SMTP, RADIUS, Syslog, NTP server, HTTP request
API
Notification E-mail, phone call, SNMP, WEB to SMS, SMS Link
Logging SD, USB Flash, E-mail, FTP
power supplies single/redundant 24-48Vdc, 230Vac (contact sales regarding versions)