Event and schedule controlled switching 230VAC/10A
Accurate current measurement
Input for 2 sensors - temp/humidity, pressure
RJ45 to Ethernet
NTP function
Power port on/off via HTTP(S), SNMP, ModbusTCP, Telnet, SSH, MQTT
1-channel watchdog
Power port assigned to Watchdog (ICMP/TCP), auto reboot starts
Power consumption measurement (kwH) with 2 energy counters: one counter counts consistently, the other counter can be reset
Measurement of current (A), voltage (V), active power (W), apparent power (VA) and reactive power (VAr)
Measurement of differential current type A (mA)
Dimensions: 120 x 65 x 53 mm
The PDU is a network-compatible power distribution unit with a power port, which enables the switching and current metering of electrical devices via TCP/IP network. The device has a power port IEC C13, max. 10 A.
The power port of the PDU can be switched via a Webinterface, SNMP or directly on the device. At the same time, the Power Distribution Unit has SNMPv3, SSL and IPv6 capability and supports Telnet, Radius and Modbus TCP.
Thanks to the sensor connector a plug-and-play sensor can be connector to monitor environment temperature, humidity and air pressure. The connected load can be switched by the IP watchdog when preset sensor or current thresholds are exceeded.
Inkl. 4 stk. temperaturføler + GPS modul
1 shift relay output (NO / NC), relay contact: 24V / 0.5A
1x on / off output, (PTR multiconnector)
Power supply 12VDC / 500mA included
1 x RJ45 Ethernet
APP for Android & amp; iPhone
SNMP Get / Traps (SNMPv1, SNMPv2c)
Syslog and Email support
Control via SMS messages
Alarm at power failure
Relay output for 230VAC
Universal input for temperature sensor
GSM I / O Box. Compact access control with up to 999 users
Specified time range for access
3G / 4G 850/900/1800/1800/1900 MHz
2 digital contact inputs
1 Relay output 230vac Max. 3A
Supply voltage: 9 -15VDC
Goal: 88 x 70 x 30 mm
Operating temperature: -20 - + 60 ° C
Antenna included
App for Android and iOS
