![](https://debugger.danbit.dk/demo/5052-large_default/termofler-med-3-m-kabel-gsm.jpg)
![Mobile controlled outlet -...](https://debugger.danbit.dk/demo/2140-home_default/mobil-styret-stikkontakt-gsm.jpg)
Mobile controlled outlet - On and off equipment via the GSM network
On / off via SMS messages
plugged in socket to GSM 2G network
Setup with phone number
Connects to 230vac
Maximum 10 amp
with Schuko connector
SIM card not included
Thermal sensor for mounting 3 meters
Sensor tip: stainless steel
Medium 3.0V - 5.5V supply
With new chip for each pin
BLUE pin: DATA
BLACK pin: GND
RED pin: VCC
1-wire (multiple to same pin)
These waterproof sensors are sold with different lengths. This sensor uses the 1-Wire communication interface, which allows you to connect several of these sensors to the same pin. It has stored a unique 64-bit address that identifies each sensor, the sensor tells us what gives us temperature measurement or reading the temperature of a seo. Measured in a temperature range between -55 ° C and 125 ° C
On / off via SMS messages
plugged in socket to GSM 2G network
Setup with phone number
Connects to 230vac
Maximum 10 amp
with Schuko connector
SIM card not included
Global 4G LTE Controller, logger and alarm
Supports all LTE frequencies
Setup via USB, SMS and HTTP API
USB setup - use USB cable with Mini B male
2 digital "dry contacts". High on contact
2 analog inputs, 0 - 10VDC or 4-20mA input (10bit)
4 relay outputs, COM, NO and NC
1-Wire input for up to 8 Teracom sensors
1 x RS485 for max. 8 MODBUS RTU sensors
Data logger with 70,000 logs
Upload data to HTTP/HTTPS Post in XML/JSON
SMS alarm and Email alarm to 5 recipients
Push mode – XML data is sent via HTTP Post to a remote server. Responses from server may contain relay setup.
10 to 28VDC, 370mA @ 12VDC - additional PSU
Dimensions: 158 x 119 x 34 mm
Weight: 470g
Temperature: -20 - +55°C
3,6 V/1200 mAh batteri til ca. 60 timers drift ved fuld opladet
Temperatursensor til temperaturmåler med 2 meter kabel