Power rail with anti inrush timer
3 seconds between voltage connection of each outlet
3 seconds between disconnection of each outlet
ON/OFF switch on the front
Purchase of JACK terminal for wired remote control
6 pieces. CE 7/7 schuko plug with ground
Overvoltage protection
Mains input filter
Max. 16A with 230VAC
2 meter mains cable
1U rack format
Dimensions: 440 x 62 x 44 mm
Connected devices can be switched on and off sequentially with an automatic switching routine. Operating the switch on the front panel triggers a 15 second switching sequence, which switches the individual effect ports one after the other with a 3 second delay. This delay interval between the switching processes can be set individually.
This avoids the typical voltage peaks caused by high inrush currents when several loads are switched on simultaneously.
Even more important: A possible tripping of the upstream fuse in the supply line is effectively prevented. In addition, sequential switching avoids that sudden changes in current in the supply line lead to disturbances in the circuit.
An application example can be found in AV installations including an amplifier which can trigger powerful DC current to the speakers: LED panels and other switch mode high power devices.
Strømskinne med 8 EDB-stik til rack mount
Strømskinne med strømmåler, og 6 runde udtag
4 kW power rail for mounting in 19 "rack cabinet
24 X C13 female plug, 16 AMP CEE male connector, 1 facet
113 cm (L) incl. mounting bracket
LCD display shows power, voltage and power as well as total consumption in kWh
6 outlets
With earth
13A 250VAC 50 / 60Hz
black
7meters cable
Good quality
