7 ports PDU with overall power meter via network
can measure residual current measurement
One power meter can be reset, the other accumulates consumption.
User interface via web browser with Password
7 x IEC C13 outputs, max. 16A (safety socket)
1 x RJ45 to LAN and 1 x RJ45 for external sensor, temperature, moisture, hPascal
SNMP Get / traps and e-mail support
S-IND19"239V gør det muligt at tænde og slukke, samt måle på elektriske apparater gennem TCP/IP-netværk eller seriel grænseflade. 7 x Schuko udgange (maks. 16 A). Disse strømporte kan styres individuelt via Web-interface, seriel grænseflade, SNMP eller en trykknap direkte på enheden. Sensor indgangene giver mulighed for overvågning af omgivelsestemperatur og fugtighed. Temperatur og temperatur/fugt sensorer.Denne model kan måle Resterende strømovervågning type A.
temperatur og fugt føler, kan måle i vådt miljø
Sensor registreres automatisk (plug-and-play)
Længde: 2,3 m med RJ45 interface
-20 ° C til +80 ° C
Box temperature and humidity sensor for wall mounting
Sensor detected automatically
Can be connected with RJ45 STP cable up to 40 meters from the control
Temperature and humidity range: -20 ° C to + 80 ° C, + / -0.5 ° C, 0 to 90% rH, +/- 3%
temperatur og fugt føler, kan måle i vådt miljø
Sensor registreres automatisk (plug-and-play)
Længde: 2,3 m med RJ45 interface
-20 ° C til +80 ° C
Atomic clock with time from GPS satellites
NTPv4 Stratum-1 GPS Network Time Server.
GPS accurate to 15 nanoseconds (GPS locked).
NTP accurate to 3 microseconds (GPS locked).
Synchronize more than 2 million clients with standard NTP polling frequency.
10/100 Mbit auto-sensing, auto-MDIX Ethernet port.
IPv4 and IPv6 internet protocols.
SNMP v3
Active GPS antenna included
10 meter coax cable included
Dimensions: 144 x 103 x 30 mm
Supply voltage: 7.5VDC / 1A
PSU included
The ideal choice for Server Room and Server rack monitoring.
4 x potential-free switching relay outputs - 36VDC / 3A switches
Large LED display for power measurement, IP address, sensor data and error reports
4 x Watchdog for monitoring connected PCs (ICMP / TCP)
12 x passive signal inputs - (contact inputs) for Phoenix plugs
4 x RJ45 for temperature / humidity sensors. RS232 / 485, 1 x RJ45 for LAN
Features, limit values, alarm receivers set up on the device via supplied software
2 x 12VDC power supply inputs (redundant)
PoE - Power over Ethernet for 2111-2 the model.
Free APP for Android and iPhone
SNMP Get / Traps (SNMPv1, v2c, v3)
20 ports PDU with individual and total power meters via network
User interface via web browser with Password
16 x IEC C13 outputs 10A & nbsp;
1 x RJ45 to LAN and 1 x RJ45 for sensor, temperature, moisture, hPascal
4 x Schuko outputs 16A
SNMP Get / traps and email support
