LoRaWan transceiver with digital inputs
LoRaWan transceiver with relay output (SPDT)
Supporter LoRa Class C Protocol
Serial Port: RS232 or RS485 (Transparent data)
Collects data to be transmitted to LoRa-Gateway Controller
Frequency: 868MHz - Range Up to 10 km
1 x Antenna 2dBi - SMA male connector
Configuration Port: Micro USB
Operating temperature: -40 - +70°C
Supply voltage: 5 - 24VDC
Dim: 79 x 60 x 24 mm
is an indoor loRa-node controller used for data collection from multiple sensors. It contains various I / O interfaces, including digital inputs, relay outputs and serial ports to simplify the implementation and replacement of Lorawan networks. In addition, it can trigger multiple states and actions without a network. With its industrial design and IP30 metal house, it is very used in indoor applications such as smart industries, building automation, etc. The Lorawan controller with built-in multiple industrial interfaces connects to all types of sensors, meters and other appliances. It also bridge between Modbus data between serial and Ethernet network via Lorawan. It supports Lorawan Class C protocol to be in full compatibility with standard Lorawan gateways including the Lora Gateway5 series. It is ideal for large-scale IOT application implementations, such as projects for building automation, smart measurement, HVAC system, etc. With multiple interfaces, Lorawan controller can perfectly help retrofit older assets to IOT activation.
Switch mode type
100-240 VAC to 5VDC / 4 A
DC plug. 5.5 / 2.5mm
12 Volt 15 W power supply
DIN rail mounting
Screw terminals
Fine tuning output voltage
Operating temp: -30 - + 70 ° C
LoRaWan with stable connection to IoT units
4 x 10/100 / 1000Base-T RJ45 LAN ports
1 x 10/100 / 1000Base-T RJ45 WAN port
1 x LoRa antenna - 2DBI with SMA male
1 x Serial console Port (RS485)
2 x DI / DO and 1 serial port (RS485) for Modbus applications
For EU 868MHz (SUB 1G) Frequency
8 Programmable parallel demodulation paths
static IP / PPPoE / DHCP client for WAN
DHCP server / NTP client for LAN
Protocols: TCP / IP, UDP, ARP, IPv4, IPv6
port forwarding; Qos; DMZ; IGMP; UPnP; SNMPv1, V2C, V3
Dim: 135 x 135 x 50 mm
LoRaWan with stable connection to IoT units
Dual Band WiFi - 2 antennas with RSMA male
3 x 10/100/1000Base-T RJ45 LAN ports
1 x 10/100/1000Base-T RJ45 Wan-Port
1 x LoRa Antenne - 2DBI with SMA male
2 x DI / DO and 1 serial port (RS485) for Modbus applications
to EU 868MHz (SUB 1G) Frequency
8 Programmable Parallel Demodulation Roads
Static IP / PPPoE / DHCP Client for WAN
DHCP Server / NTP Client for LAN
Protocols: TCP / IP, UDP, ARP, IPv4, IPv6
port forwarding; Qos; DMZ; IGMP; UPnP; SNMPv1, V2C, V3
Dim: 135 x 135 x 50 mm
Waterproof Outdoor PoE+ Injector 30Watt
1 x RJ45 Data
1 x RJ45 Data and PoE+
1 x 2-pin DC Phoenix connectors
IK10 Vandal safe
Supply voltage: 24 - 56VDC
POE Standard: IEEE 802.3 at / af
End-Span
Pin: (+ 1.2) (- 3.6)
Operating temperature: -40 - +75°C
wall mounting
Size: 170 x 73 x 44 mm
Weight: 340g
For hard industrial and outdoor environments.
Power over Ethernet - POE - No extra power source
Extend a PoE voltage and data signal up to 100m
over a single CAT 6 cable (STP cables recommended).
Cascade: Maximum 4 Eth-Boost-Poe + Units Fi Extension
Expands The Degree Up to 500m
IP66
8 ports Unmanaged Desktop Switch 10/100.
Plug and play.
Efficient, silent switch in compact version.
Plastic chassis.
Supply voltage: 5VDC / 0.55A mains adapter included
Dimensions: 85mm x 135mm x 60mm
Ethernet med PoE over RG59 Coax-kabel - VDSL princip.
Forlæng PoE-forbindelsen op til 500 m via Coax kabel
Egnet til IP kamera m/Poe over eksisterende Coax-kabler.
