

1000Mbit SFP module 1000Base-LX, Single mode, LC. Up to 50km
MiniGBIC / SFP, LC type, 1310 nm, 50 km, single mode
One port compact 10/100 TX to 100FX media converter
Link-Loss Forwarding (LLF) far-end fault detection technology
Compliance with IEEE 802.3 / IEEE 802.3u standards /
IEEE 802.3x standards
Supports 19 ”3U 16 slots chassis mounting, Rack-1001/1002
JetCon 1501T 10 / 100Base-TX to 100Base-FX, ST connector,
Multi-mode 2KM
Limited Stock!
The JetCon 1501 Fast Ethernet Media Converter series are designed to convert 10 / 100Base TX signals to 100Base-FX signals. They extend the connection range of Ethernet device to transmit & receive data via fiber cable without performance degradation. JetCon 1501 series are using store-and-forward technology in switching converter mode. They will filter out abnormal packets to keep network performance, supporting the data forwarding. rate up to 148810 pps in full wire speed. The JetCon 1501 series supports auto-negotiation & amp; flow control for 10 / 100Mbps connection. With the link Loss Forwarding technology, the JetCon1501 can detect the broken link on RJ-45 port and force the disconnection on the fiber port immediately. JetCon 1501 also features diagnostic LEDs, which displays power, link, speed and activity, allowing you to quickly detect and correct problems on the network.
MiniGBIC / SFP, LC type, 1310 nm, 50 km, single mode
Network module with digital I / O Korenix JETI / O 6550
Channels: 14/8
Digital inputs: 14 pcs., Logic 0: 0 - 4 V, Logic 1: 5 - 30V
Digital outputs: & nbsp; 8 pcs. Open collector, 5 - 40 V 250mA
Isolation: Optical 2500 VRMS for analog and digital inputs and outputs for the power supply
Magnetic 1500 V from the network interface for the power supply
10/100 Mbit m / RJ45 their connector
Operating temperature: - 25 ° C - 70 ° C
Supports Modbus / TCP, OPC server, SNMP. Software included for configuration
For DIN rail mounting
Supply: 10 - 30 VDC via terminal block, Max 1.92 W
Unmanaged 8 x 10/100Mbit switch
Power redundancy
Broadcast storm packet filter
Event alarm
Dual DC10~48V power inputs
Aluminum case with IP31 grade protection
Operating temperature -25~70oC
JetCard1208L serial card. 8 x RS232, low & high backplate