8 x Digital input over Ethernet / MQTT
8 x Digital output over Ethernet / MQTT
Input voltage: up to +50VDC
Built-in Web Server
Modbus TCP/UDP and MQTT protocols
2 port Ethernet switch (LAN Bypass) for Daisy-Chain
Double watchdog (programmable
I/O-pair connection (Push and Poll)
Supports web configuration and firmware update via Ethernet
8 x input channels for Wet contact and Dry contact
Wet is active when voltage is applied
Dry is active at closing contact
LED display to show I/O status
Dimensions: 127 x 99 x 33 mm
Supply voltage: 10 - 48VDC / 3W
With digital DI and DO function, the module is an IP-based Ethernet I/O monitoring and control module. The module can be remotely controlled through a 10/100 M Ethernet network using Modbus TCP/UDP protocol. Modbus has become a de facto standard communication protocol in industry and is now the most widely available means of connecting industrial electronic devices. This makes the module perfect for integration with HMI, SCADA, PLC and other software systems.
Has 16 digital input channels for wet contact and dry contact. With 2 Ethernet ports, the module allows daisy chain connection, which allows flexibility in locating devices, eases installation and lowers infrastructure costs. It has 8 kV ESD protection, 4 kV EFT protection. Each input channel can be used as a 32-bit counter.
The module can be used together with a DO module to create a DI to DO pair connection through Ethernet. After configuration, the module can poll the status of the local DI channels and then use the Modbus/TCP protocol to continuously write to the external DO devices.
It is equipped with a removable terminal block connector for easy and robust wiring in industrial situations and has a powerful 32-bit ARM MCU to handle efficient network traffic.
ICP DAS I-7231-D-G-CR
RS485 Module with 16 digital inputs
inputs are Dry Contact - High at contact to GND
RS485 The module is slave
supply: 10 - 30vdc
DIN bracket
8 channel analog input module for RS485 Bus
16bit resolution
10 measurements per second (total)
for current measurement - shunt with 125 ohm resistance
Supply voltage: 10 - 30vdc / 1.3 watt
Dim: 123 x 72 x 35 mm
with your bracket
4 x Digital input and 4 x relay output
Form A and Form C Power relay
Source and Sink type of D/I
D/I the entries is also 16-bit counter
Configurable Power-on settings
Configurable Safe Value setting
Dual Watchdog
Temperature range -25 to + 75 ° C
Supply voltage: 10 - 30VDC
DIN bracket
