Web Relay over LAN, Internet 1 x Digital in, 1 x Power Relay out, 30VDC, 240VAC 12A. P2P, HTTP, XML, Modbus TCP/IP, 9 - 28VDC

Controlbyweb I / O module with digital in and relay Out
No programming required
Full control of web browser or XML messages
is also a Modbus / TCP slave
password protected
30vdc , 240vac, 12a relay switch
on / off or pulsed relay states
optically isolated digital input
suitable for monitoring / relation management
Remove-Reloading (peer-to-peer)
Auto-restart
Selectable TCP ports
Removable terminal connector
DIN rail or wall mounting
Power supply: 9-28VDC / 0.5a

X-WR-1R12-1I-I
2,431.00 DKK
Tax excluded
Quantity
Physically in stock  

  • Download PDF
  • file_download Downloads
  • live_help Ask a question

Web relay, can provide remote control in countless applications, including pump and engine control, safety lock systems, restarting remote control and light control. Web relay
Powerful and flexible design makes the imagination for the only limit.

Web relay also has optically isolated input that can be used to monitor the state of the units, control the relay or control a remote relay another place on the network. This feature is useful for expanding output from a PLC to another building or allowing a switch to control a device in another mode. Simply connect the relay contacts to the device to be controlled and turn on and off the relay externally by means of a web browser. Web Relay has an optically isolated input that allows you to monitor a unit's condition or control the relay contacts using a voltage. Web relay can even be used without a computer (when the installation is completed) by connecting two devices together. This is done by connecting a switch or applied a control voltage to a device and connect another device to a distant location for the device to be controlled. A PLC can control a motor in another building using two web relay devices.

4 other products in the same category:

Environmental monitoring of...

Environmental monitoring of CO CO2, temperature, humidity. For APP, MODBUS RTU / TCP, RJ45, RS485, alarm

CO2 - CO - temperature - humidity
measurement of carbon monoxide and carbon dioxide
alarm device at high concentration
color LCD display with touch
CO 9-1000 ppm
CO2 0-9999 ppm
Electrochemical sensors (NDIR CO2 sensor)
temperature of -10 - + 50 ° C, humidity 0 to 100% RH
Up to 450,000 logs with date and timestamps
APP: iOS APP and Android APP, powerful software
DCON, Modbus RTU / TCP and MQTT protocols
RS-485 2-wire / Ethernet RJ45
Relay output for local alarm or building management
Power supply: PoE and 12 - 48VDC ca. 3.5Watt
IP43 sealed enclosure (CO2 + temperature sensor)
Dimensions: 114 x 106 x 56 mm
DIN or wall mounting bracket

Price 5,773.00 DKK
Product code: ET-AIRCOCO2TH-I
Physically in stock  
Quick view
High Speed ​​8 analog...

High Speed ​​8 analog inputs 200 kHz sample rate, 16-bit, 4 digital outputs, 4 digital inputs, -25 - + 75 ° C, PoE, 12-48VDC

8 single ended input +/- 10V analog, +/- 5V
200kS / s (200 kHz) for each channel sampling rate
FIFO 2000 is sampled - the memory of 30 million data samples
16bit solution
Trigger mode: SW, Ext. clock, digital falling edge (post, pre, delay), analog
1 x 32-bit counter, max. 30 kHz
4 x digital input (wet) up to + 30VDC
4 x digital output (Open Collector) up to + 30VDC, 100mA
Overload protection up to 1.3A
1 x Ethernet port RJ45
Security: ID, password and IP filter
Powered by the PoE or 12 - 48VDC, 2,6W
Dimensions: 120 x 76 x 38 mm
Housing: Metal, with DIN bracket
Operating temperature: -25 - + 75 ° C

Price 6,347.00 DKK
Product code: ETHIO8AI8IO-P-I
On the way in  
Quick view
Environmental monitoring...

Environmental monitoring station, industrial and outdoor. CO2, particle, temperature, humidity. APP, MODBUS RTU/TCP, RJ45, RS485

Industrial / outdoor robust environment-measuring station
Partikkelstørrelser down from 0.3μm to 10 μm 
CO2 0-9999 ppm - electrochemical sensor
temperature of -20 - +50°C
Humidity of 0 - 100% RH
Dewpoint measurement based on the temperature and moisture
Up to 180,000 logs with date and time stamps
Web-based configuration interface
Effective software: iOS APP and Android APP (free)
DCON, Modbus RTU / TCP and MQTT protocols
RS-485 / Ethernet / PoE
Relay output for local alarm or building management
Power supply: PoE and 12 - 48VDC ca. 3.5Watt
IP43 sealed enclosure (CO2 + temperature sensor)
Dimensions: 211 x 130 x 70 mm
DIN or wall mounting bracket

Price 7,046.00 DKK
Product code: ET-CO2MULTI-I
On the way in  
Quick view