MODBUS / TCP to serial RTU Master Slave, Gateway, 1 x RJ45 1 x RS232 1 x RS485 isolated, -25 - +75°C, PoE, or 12 - 48VDC

Compact Modbus / TCP to RTU / ASCII gateway with PoE
not to be programmed
1 x RJ45 10 / 100Mbps
1 x RS232 (terminal block) - 5-pin
1 x RS485 (terminal block ) - 2-pin
baud rate up to 115,200 bps
Self-tuner for RS232
IEEE 802.3af - PoE (PD)
Supply voltage u / PoE: 12 - 48VDC 2Watt
Dimensions: 90 x 52 x 27 mm
DIN bracket
Operating temperature: -25 - +75°C

ETH-MODGW724-I
206.98 EUR
Tax excluded
Quantity
On the way in  

  • Download PDF
  • file_download Downloads
  • live_help Ask a question

ETH-MODGW7xx series is a Modbus gateway that allows for a Modbus TCP / IP - UDP host to communicate with serial Modbus RTU / ASCII remote terminal units through an Ethernet network, thus eliminating the cable length limitation of legacy serial communication devices . The module can be used to create a pair-connection application (Pair-connection) as well as serial-bridge or serial-tunnel application) and can then route data over TCP / IP between two serial Modbus RTU / ASCII devices, is useful when connecting mainframe computers, servers or other serial devices using Modbus RTU / ASCII protocols and does not even have Ethernet capability. The maximum number of TCP connections for each serial port is up to 32 (RevB), this offers several Master access to slave devices on the same serial port. Read cache function is used to save previous requests and responses in the memory buffer in ETH-MODGW7xx. When other HMI / SCADA master controller sends the same requests to the same RTU slave device returns the cached answer immediately. This feature dramatically reduces the load on the serial
port communications and provides for faster TCP response, and improves the stability of the entire system.

Rev: LO

Driftstemperatur
-25 - +75°C
Forsyning
PoE (PD)
Kabinet
Plast med DIN-beslag og terminal-blokke
Mål og vægt
95 x 52 x 26 mm
Porte
1 x RS232 og 1 x RS485 (begge kan vælges)
Porte
1 x RJ45 10/100Mbps

4 other products in the same category:

Web Relay over LAN,...

Web Relay over LAN, Internet 1 x Digital in, 1 x Power Relay out, 30VDC, 240VAC 12A. P2P, HTTP, XML, Modbus TCP/IP, 9 - 28VDC

Controlbyweb I / O module with digital in and relay Out
No programming required
Full control of web browser or XML messages
is also a Modbus / TCP slave
password protected
30vdc , 240vac, 12a relay switch
on / off or pulsed relay states
optically isolated digital input
suitable for monitoring / relation management
Remove-Reloading (peer-to-peer)
Auto-restart
Selectable TCP ports
Removable terminal connector
DIN rail or wall mounting
Power supply: 9-28VDC / 0.5a

Price 326.73 EUR
Product code: X-WR-1R12-1I-I
Physically in stock  
Quick view
MQTT 16 x Digital input...

MQTT 16 x Digital input module. TCP and MQTT protocol, 2 x LAN ports Daisy chain. Dry contact input. 12 - 48VDC

Built-in web server
Web HMI
Supports Modbus TCP and MQTT protocols
2-port Ethernet switch (LAN Bypass) for Daisy-Chain Wiring
Double watchdog
Digital input: 16 channels
Dry contact input
Input to Gnd = High (ON)
Input open = Low (OFF)
Supply voltage: 12 - 48VDC
Temperature: -25 - +75°C
Dimensions: 120 x 97 x 42

Price 328.34 EUR
Product code: MQ-I16D-2L
On the way in  
Quick view
Industrial controller for...

Industrial controller for measuring and controlling the processes. With ethernet and 4G, with data logging, MQTT, IoT

Advanced Controller with logging
With slot for internal I/O expansion module, A/D, D/A, D/I, D/O, relay
Program with simple logic functions - WISE (Web Inside Smart Engine)
Logic functions with IF-THEN-ELSE logic
Supports SNMP, SMTP, FTP, MQTT, Modbus / TCP / RTU and DCON
Ethernet 10/100 / 1000Mbit
Setup via the built-in Web server
1 x RS232 port
2 x RS485 port
Supply voltage: 12 - 48VDC

Price 1,135.68 EUR
Product code: L-CON-LOG+4G
Physically in stock  
Quick view