RS485 Frequency counter with 2 digital outputs
2 x counter entrance Max. 100kHz
input is Wet / Sink - Max + 30volt
32 bit counter - count up
for frequency and pulses
2 X Digital Output - Open Collector (OC)
Max. OC voltage: 30VDC / 30MA
Supply voltage: 10 - 30VDC
Dim: 123 x 72 x 35 mm
Operating temperature: -25 - + 75 ° C
M485-Count-I offers 2 high speed counter or frequency input channels and 2 digital output channels. Two types of digital input, one to isolated input, and the other is for non-insulated input. The isolated input provides 3750 VRM's insulation voltage, and the non-isolated input provides programmable threshold level.
The built-in digital filter is valid for both non-isolated and isolated input and can filter noise out how high / low pulse width is less than that digital high / low width.
The maximum number is up to 32-bit, and the maximum frequency is up to 100 kHz. The module also provides programmable alarm output with non-isolated Open Collector ..
3,0 meter kabel til brug mellem I/O-kort og TERM100S
Intelligent Controller with Web Server
Logical functions, such as: IF-THEN-ELSE
No programming. Just select, click and finish
Supporter: I/O module, counter, hour, e-mail
Modbus / TCP protocol for SCADA software Seamless integration
IEEE 802.3af compatible power over Ethernet ( Poe)
1 x RJ45 - 100Mbit Ethernet
7 x Analog input: 0 - +/-2.5V, 0 - 20mA (ext. Resistors)
A/I Resolution: 16bit
10 Samples per Second
A/I Also to Thermocouller: J, K, T, E, R, S, B, B, C, L, M, LDIN43710
6 x Digital Output: 0 - + 50VDC / 700mA Open Collector
Supply voltage: POE or 12 - 48VDC / 4.5Watt
Expansion module for X-400-I and X-600M-I
4 x C relay 125VAC / 30VDC 2.5AM
C / SPDT Relay
10 pole interconnection flat cable for controller
RS485 communication Between the units
supply voltage: 9 - 28VDC from controller
Dim: 99 x 78 x 36 mm
3 solid state relæudgange (kun til AC)
4 optoisolerede digitale indgange
