4 x HDMI inputs to 4 x HDMI outputs
Viewing the screens 4 are summarized on a screen
display screen 1 distributed over 4 skærme
Can used with DVI adapters
• HDMI, HDCP1.1 and DVI compliant
• Deep color support 8/10/12 bit source
• Seamless switching
• Supports four different modes: Matrix mode / Dual mode / Quad / TV Wall mode
- Matrix mode: Can routes and output any 4 source to any 4 displays with seamless switching (Note: Under output timing 1080i @ 50/60 input 4 will be disabled, OSD will show "IN 4 Disabled")
- Dual mode: Can display POP (Picture Of Picture) & amp; PiP (Picture In Picture) image com bined by 2 sources to be presented on the HDMI output ports (Dual A and Dual B)
- Quad mode: Can output all sources to a display (4 in 1) as a full image
- TV Wall Mode: Can output any source to 4 displays (2 by 2 video wall) as a full image with adjustable Bezel Correction for 4 displays
• Supports OSD, RS232, Telnet, WebGUI, Remote control and on-panel controls
• Input resolutions support VGA ~ WUXGA and 480i ~ 1080p
• Output resolutions support 480p ~ 1080p
• Supports different input resolution and output resolution selectable from OSD menu (factory default value for the output resolution is 720p @ 60Hz / 2CH LPCM)
• Audio supports LPCM 2CH, 6CH, 8CH / AC3 / DTS / Dolby Digital Plus / Dolby TruHD & amp; DTS-HD Master Audio
Remote switch for 2 PCs and 1 HDMI monitor.
Button on the front or remote control can be used to select the PC input.
HDMI, HDCP and DVI compatible 32 x 32 MATRIX
Modular - input and output modules
Input and output modules can be mixed and added to 8 × 8 input module and output module
4 input and 4 output modules with HDMI, DVI
VGA module is only input
Supports a wide range of PC and HDTV resolutions from VGA to WUXGA
480i to 1080p and 4K2K @ 24/25/30 Hz
Control of the matrix via the front panel, RS-232, Telnet, WebGUI controls
10 available preset settings
3 EDID modes: Standard, Dynamic and Manuel
Power supply with redundancy
HDMI cable up to 15 m
HDbaset 5Play ™ convergence support HD video, HD audio, PoC
Ethernet and IR / RS-232 control
Connect up to 5 PCs or HDMI sources to 1 monitor
Remote control included
Switching with push button or remote control for HDMI 1.4 and HDCP 1.2
Resolution up to 1080i / 1080p
Power supply included 5VDC / 1.2A
HDMI Matrix over IP.
Video Wall configuration
Setup with DIP switches (TX-RX Pair)
Max 24 transmitters and 96 receivers (contact us for buying TX or RX units separately.) < br> HDMI 1.3, HDCP 1.3.
HDMI loop out to the local monitor
Resolution 1080p @ 60/50/30/25 / 24Hz, 720p @ 60 / 50Hz.
point to point over Cat 6. Maximum . 100meter. Point to many Hotels can be supplied via PoE (802.3af) or 12VDC 1A (PSU included).
Power Consumption: 2.5W.
Switch must support protocol: IGMP Snooping or IFMP.
Delay: 120ms
Operating temperature: 0 ~ 40 ° C.
