4 x RS485/422 COM ports over fiber, fiber network
Extender over fiber with 4 x RS422 / 485
1 x 100 Mbit fiber
Screw terminal block (5 pole)
SFP slot for 100mbit Multi Mode LC Fiber
62 x 50 x 120 mm
Display 3 LEDs Displays TX / RX, Network and System Status
Supply 9 - 32 VDC (not supplied)
Boost-4RS485 fiber can connect serial ports over fiber network over distances up to 2 km, 30 km or 60 km - depending on the type.
Can be configured with a built-in web server.
Supplied without SFP module - purchase Boost-4RS232 - Modul2 - LC Multimode.
Ideal for plants where parts of the network use light guide cable. See our other equipment with fiber interface (network cards, switches, media converters, etc.) Typical applications can be found in industrial environments where electrical disturbances are critical.
Serial ports: 4 x RS422 / 485 ports at speeds from 1200 bps for 115 Kbps
Data Bit: 7/8, Stop Bit: 1/2
Parity: Straight / odd / No
Flow Control: RTS / CTS, Xon / Xoff
Signals: RS485: TX +, TX-, RX +, RX-
Network: 100Base-FX Via LC Light guide cable
protocols: TCP / IP, UDP, HTTP, SNMP READ, Telnet, DHCP, ICMP, BootP, ARP
Connector: Serial Ports: RS485: 4 x Screw Technical Block (5-pole)
Light guide: SFP connector for LC Fiber
supply: Screw terminal block with extra supplied. For redundant supply
cabinet: 162 x 50 x 120 m.m. (H x B x d) - w / Holder for your shine
display: 3 LEDs Displays TX / RX, Network and System Status
Power Supply: Requires 9 - 32 VDC Max. 6 watts via screw terminals (supplied. Not )
Use DC12V / 1A-RQ
Net adapter 12V, 1A - Switch mode
Output: 12VDC / 1Amp
230VAC input
Power plug: 5.5 / 2.5 mm
Cable color: + Red, - White
RS232 Rxtends up to 250 meters over RJ45 cable
Baud rate: 110 ~ 921,600, 8-bit
Use STP (shielded) patch cable - straight through
The network cable must not be connected to the patch panel
1 x 5VDC/1A - the power supply supplies both devices (PoC)
Important: If the distance is long, 2 power supplies are recommended
Important: If the network cable is of poor quality, use 2 power supplies
Single-Mode Fiber (Multi-Mode optional)
1-Channel Duplex Rs485
Point-to-Point or Daisy-Chain (M485-FIBER-SR is needed)
DC input 5V (< 3W)
Operating tempeture: -45 C~+75 C
Up to to 115.2Kbps data rate
Single-Mode Fiber (Multi-Mode optional)
1-Channel Duplex Rs485
Point-to-Point or Daisy-Chain (M485-FIBER-ST is needed)
DC input 5V (< 3W)
Operating tempeture: -45 C~+75 C
Up to to 115.2Kbps data rate
Extends serial cables up to 1600 meters or printer cables up to 180 meters.
