DVI-D extender with local and remote module up to 50 meters.
Extend DVI-D up to 50 meters via CAT. 6 RJ45 Cable
Do not connect network switch
with built-in EDID (emulate monitor)
Power supplied with 5VDC from the DVI connector on the PCE
External power supply: Buy DC5V / 2A-R-Q
Consisting of a local module that plugs into the PC's video card with DVI-D output, and a remote module attached to a monitor with DVI-D input. Local module and remote module is connected through a UTP RJ45 category 6 network cable. See DANBITs range of Category 6 network cables in Chapter 27 BOOST DVI50 supports image resolutions up to 1920 x 1200 at 60 Hz.2 paragraph. BOOST DVI50 can be placed next to each other, if the adapter DVIM-F is used.
Adapter DVI-D Male to DVI-I female
DVI-D og USB2.0 KVM-extender over netværkskabel
Punkt-til-punkt DVI-video og USB
Op til 100 meter over et enkelt CAT 5e / 6 / 7-kabel
Ukomprimeret HD-video med 1920 x 1200 opløsning
24-bit farvedybde
USB 2.0 op til 40 Mbps
ExtremeUSB® extender
Transparant USB overførsel
Maks. forsinkelse er op til 1ms
Plug and Play; ingen softwaredrivere kræves
Fungerer med operativsystemer fra: Windows®, OS X® og Linux®
Monteringskit: gør det muligt at montere enheder på vægge, skriveborde eller 19″ stativer.
Sender and receiver for the transfer of DVI signal up to 1.2 km via fiber optics
SC Multi Mode fiber cable PC and monitor
Also transmits audio signals to microphone and speaker
REMAINING STOCK - limited quantity
With the included software for PC can be DVI-D shared via LAN
DVI-ETH + connect a DVI-D screen where desired and retrieves DVI signal over the network
Multiple DVI-ETH + can be connected to the same network
DVI-ETH + can also act as external graphics card via the PC USB port
Transmits DVI video and audio signals up to 120m over a single CAT6 cable
Supports resolutions up to 1920*1080@60Hz
Supports keyboard and mouse signal transmission
A cable can transmit several signals simultaneously
Transmission distance: CAT 6 120m or TCP/IP
LAN diode flash at link
Plug and play support without any settings
Including DC12V/1A power supply
Size: 164 x 85 x 25 mm
Weight: 2 x 220g
Temperature: 0 - +50°C
