![](https://debugger.danbit.dk/demo/15491-large_default/300mbps-udendoers-access-point--med-indbygget-dual-polariserende-antenne--ip55--poe--eller-12vdc-via-dc-jack-.jpg)
![RF Combiner - 2 antenner...](https://debugger.danbit.dk/demo/3285-home_default/rf-combiner-2-antenner-til-samme-transceiver-tilbehr.jpg)
RF Combiner - 2 antenner til samme transceiver
Samleled til 2 antenner i ét, 3 x N (hunstik)
300Mbps AP, Gateway, Repeater, WDS, WISP
2T2R architecture with dual-polarization 14dBi antennas built
Transmission power: 100mW
10 / 100Mbps RJ45 Kirke pipe-mounting and wall mounting
supports WAN connection for DHCP, Static IP, PPPoE
IP55
Power supply: 48VDC 0.5A (802.3at PoE +) or 12VDC 1A (via DC jack)
Operating temperature: -20 - + 70 ° C
OUTLET - OLD MODEL
Reliable and stable outdoor wireless solution
WLAN AP300CPE is a cost effective outdoor wireless solution for wide-ranging space applications. It is suitable for outdoor wireless connectivity to CPE users or that of building a long lasting relationship between suburban / rural areas through the 2.4 GHz frequency band. With the built 8dBi polarization directional antenna provides WLAN AP300CPE higher performance and longer distance for wireless connection. WLAN AP300CPE provides high power output with multifunction adjustable Tx controller that enables CPE users easily install and adjust the suitable value in appropriate places. When connected to WLAN AP300CPE can expand the system integrator a reliable wireless connection from indoor to outdoor.
Samleled til 2 antenner i ét, 3 x N (hunstik)
1800 Mbit/s Access Point, Gateway, Repeater, WPA3, Dual Band, Wall / Ceiling Mounting
Support 802.1Q VLAN and SSID for VLAN Mapping
Ofdma (Orthogonal Frequency Division Multiple Access)
Support WiFi Multimedia (WMM), IGMP
Seamless Roaming
2.4GHz (600Mbps) and 5GHz (1200Mbps)
High transmission power, adjustable
4 built-in 5 dBi antennas
8 x SSID, up to 250 Clients
1 x RJ45 with PoE + input
1 x RJ45 LAN
supply voltage at non-PoE: 12VDC / 2A (5.5 / 2.1mm)
Dim: 186 x 186 x 36 mm
Operating temperature : 0 - +55°C
Wifi Access Point, Bridge, Client. DIN mount
2,4GHz or 5GHz, 300Mbit
MIMO antenna, 2 x RSMA female
9 - 48VDC, 6Watt
Temperature: -10 - +60°C
Size: 47 x 110 x 90mm
Wifi AP, Client, Bridge, Repeater, Router
Industrial 2 x 2 Mimo
Qualcomm Atheros QCA9892
Supports IEEE 802.11 A / B / G / G / N / AC
2 x 10 / 100Base -Tx Wan / Lan-Port
TX Power 21 db to 2.4 GHz
TX Power 18 BB for 5GHz
WPA, WPA2, WPA3, WEP, TKIP, AES
Supply voltage: 9 ~ 48VDC In the 4-pin terminal block
protection against reverse polarity
IP30 protection
DIN rail or wall mountable
Operating temperature: 0 ° to 60 ° C
Dim: 162 x 110 x 46 mm