DANBIT offers many different Ethernet switches. We can only show a representative part on our website.
If you cannot find the switch that fits your task, please contact us by email or phone and we will find the one that can solve the task.
The purpose of a network switch (Ethernet switch) is to connect other network devices to each other.
Good and stable network switches are very important communication...
DANBIT offers many different Ethernet switches. We can only show a representative part on our website.
If you cannot find the switch that fits your task, please contact us by email or phone and we will find the one that can solve the task.
The purpose of a network switch (Ethernet switch) is to connect other network devices to each other.
Good and stable network switches are very important communication devices that allow data communication between different network devices locally and the World Wide.
The network switch handles the flow of data across a network, also called back bone, by only sending a received network packet to the one or more devices to which the package is intended.
Each network device connected to a switch can be identified using the network address, the IP address, so that the switch can control the flow of traffic that maximizes network security and efficiency.
There are 2 basic versions of Ethernet switches, the simple ones -managed switches that route data to the ports that the telegrams want. The more advanced Ethernet switches are "managed" switches, where there are a lot of setup options to control and optimize the data flow and, not least, increase data security, also in the context of cyber crime protection. A switch can be built up with up to 7 "layers" which each have their task. For example, layer 3 is for controlling IP multicast (IGMP snooping - for example, video distribution), some router functions, IP routing at VLAN configuration.
The network switch is found everywhere and plays an integrated role in most modern Ethernet local area networks (LANs). Medium and large networks contain a number of managed switches. Small and small systems typically use an un-managed switch or the LAN ports that an Intenet Router is equipped with.
An Ethernet switch can be for both PDS cables (RJ45 cables) and optical fiber cables and many Equipped with ports for both cables.
DANBIT offers a host of different network switches, ranging from PoE Switch to industrial 24-port managed switch with built-in SFP ports. See the great selection here.
There are 86 products.
Active filters
8 ports Unmanaged Desktop Switch 10/100.
Plug and play.
Efficient, silent switch in compact version.
Plastic chassis.
Supply voltage: 5VDC / 0.55A mains adapter included
Dimensions: 85mm x 135mm x 60mm
Demo Item - Without Packaging or Accessories
Korenix Jetnet 5010g
7 x 10/100 RJ45 Ethernet
3 x 10/100/1000 RJ45 Ethernet / SFP Combo Ports (10/100 / 1000 Base- T, 100 base-eg, 1000 base-x)
supply voltage: 10.5 ~ 60 VDC
Operating temperature: -25 ~ 70 ° C
5 ports Unmanaged switch - MOXA EDS-205
10/100Mbit RJ45
Broadcast storm protection
DIN-skinne
-10 to 60°C driftstemperatur
Unmanaged 6 port industrial switch
6 x RJ45 10 / 100Mbit
Redundant PSU input
Unmanaged 5 port 10/100/1000Mbit
Redundant power input
9 - 48VDC
24 VAC
PASSIVE PoE means that the switch supply voltage is on the 4 PSE ports
only used for PoE 802.3af / at PD equipment but ONLY with 48-55VDC supply voltage to the switch
5 port 10 / 100Mbit Switch with 4 PoE ports
4 x PoE RJ45 PASSIVE PoE
1 x RJ45 Uplink
48Watt per PASSIVE PoE port
Supply voltage: 12V DC - 55V
5 x 10 / 100TX Ports with Auto MDI / MDI-X
Good size for industrial use
18-32VDC
relay port alerting
Support AC 1.5KV Hi-pot isolation protection IP31 Aluminum
Operating temperature: -25 to 70 degrees
Dimensions: 111.8mm (H) x 30mm (W) x 98.2mm (D)
Weight: 290g box without
4 port PoE pass through - 10/100/1000Mbit
1 x RJ45 PoE in (data + PoE++) - 95 Watt
Mid-span and End-span
4 x RJ45 PoE out (data + PoE+) - 30 Watt
PoE out pin: +1/2, -3/6
PoE output power, total is max. 75 Watt
PoE input voltage 50 - 57VDC
Temperature: -40 - +75°C
Dimensions: 135 x 88 x 32 mm
Your bracket
16 RJ45 Ethernet ports
10/100/1000 Mbps with auto-adjusting MDI/MDI-X
DIN-rail and wall-mounting
Metal enclosure rated at IP30
Dual power input for redundancy
8K MAC address table
Working tempeture -40 to 75 C degrees
12 to 48VDC input
4 x 10/100/1G/2.5GBASE-T RJ45 copper ports
2 x 10GBASE-SR/LR SFP+ slots, compatible with 1G/2.5GBASE-X SFP
1 x RJ45-to-RS232 console interface for basic management and setup
DC 9 to 48V input or AC 24V input
DIN-rail and wall-mountable designs
IP30 aluminum case
Temperature -40 to +75 degrees C
2 x digital input (DI)
2 x digital output (DO)
Integrates sensors into auto alarm system
Transfers alarm to IP network via email and SNMP trap
IPv4 dynamic routing protocol supports RIPv2 and OSPFv2
IPv6 dynamic routing protocol supports OSPFv3
IPv4/IPv6 hardware static routing
Supports G.8032 ERPS (Ethernet Ring Protection Switching)
IEEE 1588v2 PTP (Precision Time Protocol) transparent clock mode
Supports IPv4 IGMP snooping v1, v2 and v3
Supports IPv6 MLD snooping v1 and v2
Switch Management Interfaces
SNMP Management
Flexible modular configuration, 3 Module-dedicated slots
Up to 20 possible configurations in 4 power input versions
Up to 24 PoE ports, with maximum 720W of PoE power budget
4 x 1 Gigabit or 4 x 10 Gigabit SFP Uplink slots
RIPv1/v2, OSPFv2, IPv4 Static Routing, and Multicast IP routing
ITU-T G.8032 ERPS Ring, RSTP, MRP (client) and VRRP redundancy
Dedicated MACsec modules available for additional ultra-low-latency, high-throughput strong security
Rugged industrial design for -40° ~ +75°C harsh environment operation
PROFINET v2.33 CC-B conformance
EN50155 and EN50121-4 certified for Railway and Trackside applications
4x 30W 56VDC IEEE802.3at PoE port
1x 56/24VDC PoE port
1x SFP Port
2x 48-56VDC Indgang
Driftstemperatur -40°C - 75°C
10/100/1000Mbps Data Rates
Total Power Budget 120W
Compact design
Output 54VDC vlotage for PoE device use
Space for PoE switch / PoE Surge protector installation
IP66 rated
Include Thermal Switch control heater and blower
Include fiber panel for fiber cable connection
Battery protection for deep discharge and short circuit
Space for 12V/7Ah Battery x 4PCS
Managed 8 + 2 Ports Gigabit PoE+ Switch
4 x RJ45 ports are up to 2.5Gbps with PoE++ (95W)
4 x RJ45 ports are up to 1Gbps with PoE+ (36W)
PoE Power Budget Is 240 Watts
with PoE insulation
2 x SFP slot for 1G, 2.5G and 10Gbit SFP module
RJ45 type RS232 console interface for switch control
up to 95W to 802.3BT / POH units
Detects automatic PoE Suitable devices (PD)
IGMP Snooping
Link Aggregation
Cyper Security
PoE Up to 100 meters
Dim: 330 x 200 x 45 mm
Supply voltage: 100 - 240vac
Unmanaged Switch
4 x RJ45 PoE++ port 10/100/1000Mbit
2 x 100/1000X SFP-port
Samlet PoE effektbudget: 250W
4x60W PoE ELLER 2x90W PoE+2x30W
PoE standart: IEEE 802.3bt
IP67, IK10
Driftstemperatur: -40°C ~ 65°C
Option: PoH 100W / Managed
Unmanaged Switch
2 x RJ45 port 10/100/1000Mbit
2 x 100/1000X SFP-port
Samlet PoE effektbudget: 120W
2x60W PoE ELLER 1x90W PoE+1x30W
PoE standart: IEEE 802.3bt
IP67, IK10
Driftstemperatur: -40°C ~ 65°C
Option: PoH 100W / Managed
Managed switch with 48 x RJ45 and 4 x SFP+ slots
Layer 2 switch
48 x RJ45 10/100/1000Mbit
4 x SFP+ slot for 10Gbit SFP fiber modules
Redundant Ring, Fast Recovery
IGMP Snooping, Spanning Tree Protocol
Fan with speed control
Dimensions: 440 x 330 x 44 mm (1U)
Weight: 4kg
Operating temperature: 0 - +50°C
Supply voltage: 100 - 250VAC
Managed Poe+ Switch with 48 x RJ45 and 4 x SFP + slot
48 x RJ45 10/100/1000Mbit with PoE+
Up to 36 watts per port - max. Total 400W / 720W
720watt at both 230VAC and 56VDC Input
4 x SFP + slot for 1Gbit / 2.5Gbit and 10Gbit SFP Fiber modules
Redundant Ring, Fast Recovery
Layer 3 VLAN routing
Internal temperature control
IGMP Snooping, Spanning Tree Protocol
MLD Snooping (IPv6)
Management, SNMP, DHCP Server, SMTP
Redundant Voltage Supply Input
Dim: 440 x 300 x 45 mm (1U)
Weight: 5kg
Operating temperature: 0 - +50°C
Supply voltage: 100 - 250VAC, 36 - 60VDC
Managed 10/100/1000Mbit Robust Industrial Switch
Vibration Safe and dust proof
M12 5 Pin Coded connector
with automatic Bypass for next switch if failure
IEEE 1588v2 Precision Time Protocol (PTP)
PTP is time synchronization in infrastructure
Modbus TCP/IP to SCADA
SMTP / SNMP Trap - generates Email Alarm
IGMP and MLD Snooping for Multicast
VLAN Routing (Layer 3)
CyperSecurity Minimizes safety risk / attacks
Redundant Ring, Fast Recovery
Supply voltage: 9 - 48VDC Redundant Input
Dim: 245 x 140 x 25 mm
Operating temperature: -40 - +75°C
DIN bracket , wall bracket
Weight: 1kg
Det Norske Veritas Certified marine network switch DNV GL
Managed 8 port network switch approved for ships
8 x 10/100 / 1000Mbit Auto-MDI / MDIX to 4 x 1000Mbit SFP single mode or multimode
Supply voltage: 12 - 60VDC, 18Watt
Surge rotection, over voltage protection DC input
Dimensions: 162 x 122 x 50 mm
Weight: 860g
Operating temperature: -40 - +75°C
Humidity: 10 - 90% RH (non-condensing)
DIN fittings, metal enclosure
