INSYS Linux HSPA router med RS232 port og digitale ind- og udgange EOL udgået produkt

MoRoS GPRS/HSPA - Cellular radio
MoRoS GPRS 2G: 850, 900, 1,800, 1,900 MHz; CSD, GPRS/EDGE Class 12
Max. downlink 236 kbps / max. uplink 236 kbps
MoRoS HSPA 3G: 850, 1,900, 2,100 MHz; UMTS/HSPA
3GPP Release 6 max. downlink 7.2 Mbps / max. uplink 5.7 Mbps
2G: 850, 900, 1,800, 1,900 MHz; CSD, GPRS/EDGE Class 12
Max. downlink 236 kbps / max. uplink 236 kbps
Antenna connection 1 x FME male
SIM 2 slots for 2 redundant Mini-SIM card (2FF), locked
Applied radio standards MoRoS HSPA: EN 301 489-1, EN 301 489-7, EN 301 489-24
MoRoS GPRS: EN 301 489-1, EN 301 489-7, EN 301 511

Router
Function IPv4/IPv6 router, connection management, DHCP server and client, Full NAT 
(IP forwarding, port forwarding, netmapping), DNS relay, dynDNS support, 
PPoE for ADSL modem via LAN (ext), dial-in, dial-out, callback
Security OpenVPN (client and server), IPsec (ESP normal/aggressive mode), GRE, PPTP, 
stateful firewall and MAC filters, RADIUS authentication, 10 users for dial-in, 
authentication via PAP/CHAP/MS-CHAP/MS-CHAP 2, dial filters for dial-out, 
Linkloss Detection, Failed Login Detection, no backdoor
Redundancy LAN ext. port for external DSL modem (except MoRoS ADSL), RS232 interface for external 
phone modem, 2 dial-out targets, 2 OpenVPN servers, 2 SIM card slots 
(with MoRoS GPRS/HSPA)
Connection stability Connection monitoring on several levels, hardware watchdog
Ethernet Switch, interfaces
Ports 4+1 x RJ45 (4 switch ports + 1 LAN/ext) 10/100 MBit/s for full and half duplex operation
Function Automatic detection of patch cable/cross-over cable, 
automatic speed adjustment, port mirroring
Serial interface Serial-Ethernet gateway (incoming and outgoing connections, Modbus TCP/RTU 
gateway, modem emulation, editable AT answer list, phone number conversion 
to IP addresses)
Inputs/Outputs 2 digital inputs (low active) for message dispatch, dial-out connection establishment 
(dial out, VPN serial), VPN tunnel, 2 potential-free outputs switchable via web interface, 
via SMS, time-controlled, connection display PPP/VPN
Operation
Configuration Local and remote web interface (http, https), command line interface (CLI), 
Telnet, SSH, text and binary file (also for backup), quick start for ICS
Menu languages: German, English, French
Indications (LEDs) Connection status, data/signal, device status/VPN, power, switch ports
Diagnosis Comprehensive log files, support package, integrated help functions, 
Diagnosis tools: ping, tcpdump, traceroute, DNS lookup, AT commands
Customer-specific 
programming environment
User access to embedded Linux (sandbox), 150 MB permanent memory, 
socket access, example programs: e-mail and SMS client, serial logger, etc.
Messages Hardware watchdog, system messages via e-mail, SMS (not MoRoS LAN and ADSL), 
SNMP traps, SNMP V1/V2c/V3
Events for messages (selection) Establishing WAN or VPN connection, alarm or pulses on input 1, auto update, ethernet link 
up/down, configuration change, firewall violation, failed authentification
Additional features NTP client and server, buffered real-time clock, optional monitoring packages 
Updates Update of firmware and configuration (local and remote), 
daily auto update via server (http, ftp)
Enviromental conditions

Power consumption (during connection) Approx. 3 W (logged in), max. 6.5 W (data transmission)
Dimensions (WxHxD) 70 x 75 x 110 mm (4 HP)
Operating temperature -30...+55 °C
-30...+60 °C under restricted conditions (refer to www.insys-icom.com/restricted)

Power supply 10 ... 60 V DC (±0%)
Humidity 0...95% (non-condensing)
Mounting / protection class DIN rail mounting / housing: IP40, terminals: IP20
Applied standards Radiation: EN 55022 Class B, EN 61000-6-3 Interference resistance: E